110mm 3D Models

Find the best 110mm 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

Anonymous1776101494

Make for me a cylinder what size is: Inner diameter: 110mm Inner height: 75mm. It hase a separate same swide cap what has thread both case and cap. The wall size is 2mm

Anonymous1775733731

Anonymous1773995823

Box mit separatem Deckel, passend zur Box grösse, Wand Dicke 3mm, Innenmass: Länge: 250mm, Höhe: 40mm und Breite: 110mm

Anonymous1773860741

产品类型：上下翻盖式电子设备外壳
外部尺寸：110mm × 75mm × 55mm
壁厚：2mm
材质：PLA
结构：
- 整体长方体，圆角半径2mm
- 上下盖结构，四角内置M3螺丝柱，高度4mm
- 上盖可扣合+螺丝固定

左侧面：
- 中心40mm×40mm方形通孔（用于TEC1-12703制冷片）
- 方形孔外围60mm×60mm区域做通风格栅，栅条宽1.5mm，间距2mm

右侧面：
- 右下角位置：距离底边15mm，距离右边15mm
- 开直径12mm圆形通孔（用于12mm自锁按钮开关）

内部：
- 净空间约100mm×65mm×45mm
- 内壁光滑无多余结构
- 四角M3螺丝柱，方便固定上盖

风格：简洁工业风，无多余装饰，结构坚固，便于3D打印

Anonymous1773725171

silva compass holder with dimentions of 110mm by 65mm with a raised section in the shape of a circle with a diamiter of 50mm

Anonymous1773179793

Create a precise 3D model of a thermal-printer ribbon take-up core.

Specifications:
- Inner diameter: 12.7 mm.
- Outer diameter: 15 mm.
- Length: 110mm (to match a full-width 4.3 inch ribbon).
- Cylindrical tube, hollow.
* Include square-shaped notches on both ends of the core to match Zebra-style ribbon spindle engagement.
* Notches should be clean, symmetrical, and sized proportionally for realistic
engagement.
- Smooth exterior surface, consistent wall thickness.
- Model should be centered on world origin with correct real-scale dimensions.
- Output should look like an injection-molded plastic ribbon core.
This model represents the receiving ribbon cylinder that winds up used ribbon inside a thermal transfer printer.

Anonymous1771864673

TOP VIEW에서 보면 원형 형태, 고무재질, 사이즈는 지름 80mm, 높이 110mm

Anonymous1770369526

Carré de 110 mm x 110 mm x 3 mm, avec des fentes parallèles de 30 mm de long et 5 mm de large espacées de 10 mm.

Anonymous1768778759

generate a cylinder 300mm tall with 9 compartments spaced 10mm apart and 110mm in diameter

Anonymous1769570100

A 110mm diameter disk, 7mm thick, with four 3.5mm through holes, that are located along a 100.5mm diameter that’s concentric with the disk, and a through hole in the center that's tapped for 0.25inch by 20 pitch threads

Anonymous1769446788

笔杆（主体）

• 外径：10mm

• 内径：8.4mm（壁厚0.8mm，适配笔芯通腔）

• 总长度：120mm

• 两端倒角：R1.0mm

• 尾部笔芯卡槽：内径6.0mm，深度10mm（内壁0.2mm倒角，适配笔芯尾部胶套固定）

• 头部出芯口：内径6.2mm，端口倒角R0.5mm（笔尖穿出无摩擦）

• 镂空款可选：螺旋菱形网格（菱格边长4mm，网格壁厚1mm，螺旋角30°）

笔帽（配套）

• 造型：子弹头型，顶部半球R5mm

• 内径：10.2mm（留0.2mm间隙，插拔顺畅）

• 总长度：25mm

• 内侧防滑：2圈环形凸纹（高0.3mm，间距3mm）

• 底部倒角：R0.8mm

整体适配

• 组合总长度：145mm

• 同轴度：≤0.05mm

• 适配笔芯：通用中性笔芯（直径5.8-6.0mm，有效长度≤110mm）
1. 尺寸公差：±0.05mm（所有部位，适配笔芯/插拔）

2. 壁厚最低值：0.8mm（光固化/FDM）/1.0mm（金属打印），无断料风险

3. 后处理打磨：仅打磨支撑接触点，2000目砂纸轻磨，无需整体修型

4. 笔芯适配：通用中性笔芯（直径5.8-6.0mm，长度110mm）
1. 尾部进芯口：内径6.0mm，深10mm，内壁做0.2mm倒角（方便笔芯插入，无卡滞）

2. 杆身通腔：内径8.4mm（全程贯通），笔芯插入后，尾部预留的10mm卡槽可直接卡紧笔芯尾部胶套，实现固定

3. 头部出芯口：内径6.2mm，端口倒角R0.5mm（笔芯笔尖穿出无摩擦，不刮损笔尖）

Anonymous1769149773

Anonymous1768584614

Anonymous1760323127

spacer ring 110mm wide, 40mm high, 4mm thick

Anonymous1749927398

Anonymous1761979418

Anonymous1759034109