22mm 3D Models

Find the best 22mm 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

placa de 12cm por 12cm com fum furo no centro de 22mm

Anonymous1763220744

1) 工件：75mm×108mm×20mm（单位mm；W=75水平，H=108竖直，方向固定；仅正面加工，背面保持完全平整）。
2) 坐标：Z=0 为顶面；切削仅沿 Z− 方向；严禁翻面/背面加工。
3) OP1 口袋：矩形 73mm×106mm，深度 2.0mm（留四周 1.0mm 顶平外沿）。
4) OP2 口袋：矩形 68.2mm×101.2mm，终深 3.0mm（在 OP1 基础再下切 1.0mm；形成 2.4mm 环形台阶，台阶标高 Z=−2.0）。
5) 约束：侧壁 90°、底面平；禁止任何额外边框/台阶/倒角/斜面/纹理/图案/文字/孔槽/装饰；仅执行上述两刀。

Anonymous1763128834

hole adapter from 30mm to 22mm. 30mm ring to be 2mm thick, adapter to have inside diameter 22mm, 4mm deep

Anonymous1762605005

Anonymous1761830616

Anonymous1734705850

Anonymous1734705850

参考这个样式，生成一个消音器，要求长度140mm，直径33mm，内部空心，带有22mm的螺纹

Anonymous1734705850

圆柱形杆长度(200)mm，杆身外径(14)mm，底部有椭圆插接头长轴(22)mm、短轴(14)mm，长度(40)mm。

Anonymous1775445856

圆柱形杆总长度(200)mm，杆身外径(14)mm，底部插接头适配长轴(22)mm、短轴(14)mm的婴儿车椭圆安装孔，插接头长度(40)mm。

Anonymous1775445856

A 51mm long hollow tube with external diameter of 22mm with tapering internal diameter from 14mm to 14.4mm. The 14mm end should have a 1/2x28 male threaded end.

Anonymous1766810679

hole adapter from 30mm to 22mm. 30mm ring to be 1mm thick, adapter to have inside diameter 22mm, 2mm deep. add 40mm ring to the top of the 30mm to make sure that adapter doesn't fall through the hole. 40mm ring to be 1mm thick. 40mm ring to be flush with 30mm

Anonymous1762605005

this is a rubber sleeve model with inner diameter of 22mm. The inner surface should be smooth and the entire model should be watertightness..

Anonymous1757800444

this is a rubber sleeve model with inner diameter of 22mm

Anonymous1757800444

Anonymous1750276796