View Plans

Airflow channels 3D Models

Find the best Airflow channels 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :
airflowchannelductair intake ductventilationaerodynamicair filtercomponentengineeringindustrialmachinedesigntechnology
spherical drone 3d model: Design a spherical drone with a fully enclosed internal propulsion system. The sphere is 22 cm in diameter. There are no exposed propellers. Inside the sphere, multiple ducted fans are integrated into an internal airflow system. Air is pulled in through intake vents on the top hemisphere. The airflow is guided through smooth internal ducts that curve and direct air toward exhaust vents located around the equator of the sphere. The ducts should be clearly visible as channels inside the sphere, not open propellers. The propulsion system should look like an enclosed airflow network, not a traditional drone. The center of the sphere contains a battery and flight controller for balance. The front of the sphere has a camera module. The design should emphasize internal airflow channels, ducting, and a fully integrated propulsion system. Avoid exposed rotors or open propeller layouts.
Spherical Drone 3D Model
futuristic bottle cap 3d model: Design a futuristic ergonomic bottle cap with an industrial and sculptural aesthetic, optimized for controlled airflow. The cap has a cylindrical base with realistic internal screw threading compatible with small bottle standards (24–28 mm neck, pitch 2.5–2.7 mm, 2–3 start threads, tolerance +0.2 mm). Inside the cap, integrate a central vertical air intake channel aligned with a circular opening on the front (diameter 6–10 mm). This channel acts as the main airflow entry. From this central intake, design an internal airflow system that splits into two separate curved channels leading to the two top cylindrical protrusions (“nasal” outlets). These internal channels should be smooth, rounded, and optimized to maximize airflow efficiency and minimize turbulence. The two top cylinders are hollow and function as خروج air outlets. They are tilted 15–20 degrees outward from vertical, with internal bores connected directly to the airflow channels. Ensure the internal geometry directs most
Futuristic Bottle Cap 3D Model
vehicle air intake 3d model: black curved plastic air intake duct with flange
Vehicle Air Intake 3D Model
hvac vent 3d model: hvac vent diffuser metal air duct component with circular inlet
Hvac Vent 3D Model
water filtration system 3d model: cross-sectional water filtration system with filter cartridges and flow channels
Water Filtration System 3D Model
气流循环装置3d模型: 工业结构设计图，精准机械制图，黑白线条 + 尺寸标注，无渐变无阴影，专利正式附图风格，所有结构尺寸 1:1 还原，不省略任何细节，清晰规范； 封闭内循环气流结构，包含外挂主机 50mm×50mm×22mm、微型吹吸气泵、半导体制冷片、扁平双腔管路（总宽 7.5mm、厚 1.5mm、单腔内径 2.5mm）； 气流路径：鞋头吸气腔 2 个 φ2.5mm 吸气孔抽湿热空气→进入主机制冷除湿→脚背吹气腔 5 个 φ1.2~1.5mm 吹气孔出冷风→冷气下沉→湿热空气上升回流鞋头； 标注所有结构尺寸、气流方向、循环路径、腔室功能，无细节省略，热力学内循环结构示意。
气流循环装置3d模型 3D Model
air conditioner 3d model: air conditioner unit with front vent and blue arrows indicating airflow
Air Conditioner 3D Model
rectangular channel 3d model: rectangular channel with bottom notch and thin top edge, white material
Rectangular Channel 3D Model
centrifuge 3d model: cutaway diagram of a centrifugal separator showing inlet funnel, vertical chamber, blue flow paths and red outlet channels
Centrifuge 3D Model
air filter housing 3d model: air filter housing, black plastic with dual inlet tubes
Air Filter Housing 3D Model
air duct assembly 3d model: air duct assembly with multiple curved channels and connectors, technical drawing
Air Duct Assembly 3D Model
car air intake 3d model: air intake system with conical filter and metal intake tube
Car Air Intake 3D Model
air filter 3d model: air filter cartridge cross-section with inner fiber mesh and flow arrows
Air Filter 3D Model