Bayonet 3D Models

Find the best Bayonet 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

Anonymous1759328362

Anonymous1758762329

Anonymous1758762329

Create a highly detailed, 3D printable model of The Flash CW chest emblem with an integrated bayonet twist-lock mechanism.

=== FRONT EMBLEM ===
- Circular badge, overall diameter 110 mm, thickness 5 mm.
- Raised golden rim: 3 mm thick, 3 mm tall, running around the edge.
- Background: flat circular surface inside the rim, recessed by 2 mm, smooth and solid, no holes.
- Lightning bolt: raised golden lightning bolt across the center, 6 mm thick, identical to the CW series style.
- The front must appear as a solid emblem with background and bolt only.

=== BACK LOCKING MECHANISM (Integrated Female Bayonet Socket) ===
- Add a recessed circular bayonet socket at the center back of the emblem.
- Outer socket diameter: 70 mm.
- Inner cavity diameter: 60 mm.
- Cavity depth: 3 mm.
- Include 3 evenly spaced L-shaped locking slots at 120° around the socket wall.
- Each slot: 3 mm wide, 2 mm deep.
- Slots extend inward then curve 90° clockwise to form the locking path.
- Add stop walls at the ends of the slots.
- Leave 0.3 mm clearance for FDM printing tolerances.

=== MALE CONNECTOR (Separate Part) ===
- Circular disc, 58 mm diameter, 3 mm thick.
- Top surface has 3 cylindrical locking keys, each 3 mm wide and 2 mm tall.
- Keys are positioned at 120° intervals near the disc edge.
- Keys fit into the L-shaped slots in the emblem’s back and lock with a quarter turn (90°).

=== OUTPUT REQUIREMENTS ===
- Provide two watertight STL files:
1. Complete Flash emblem with smooth solid front and integrated female bayonet socket on the back.
2. Male connector disc with 3 locking keys.
- Geometry must be clean, manifold, and fully solid with no holes in the emblem front.
- Ensure both parts are optimized for FDM 3D printing with flat build surfaces and no supports required.

=== FUNCTIONAL BEHAVIOR ===
- Insert the male connector into the emblem’s back socket.
- Twist 90° clockwise: the keys travel along the L-slots and lock under the stop walls.
- To remove: twist 90° counterclockwise and pull out.

Anonymous1734886115

Anonymous1776822338

Anonymous1733829044

Anonymous1775671169

Anonymous1752332137

Anonymous1752147114

Anonymous1750420655

Anonymous1776486046

Anonymous1776362001

Anonymous1775376653

Anonymous1773853011

Anonymous1751507402

Anonymous1765945189

Anonymous1758305329

Vietnam War - U.S. M7 Bayonet & M8A1 Scabbard

Anonymous1758245846