Box should have 3D Models

Find the best Box should have 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

Create a realistic 3D model of a large industrial metal box. The box must be hollow inside, with an overall height of 10 meters. The walls, base, and top should have a uniform thickness of 1 meter, clearly visible in the structure.

The box should have a lid on the top that functions as a door. The lid must be attached using visible metal hinges on one side of the top edge. The lid should be shown in an open position, rotated upward at approximately 60–90 degrees.

Use a metallic material with a slightly rough industrial finish (e.g., brushed steel or iron), including realistic lighting, shadows, and reflections. The edges should be sharp but slightly beveled for realism.

Ensure the interior of the box is clearly visible due to the open lid. The model should be structurally accurate and suitable for engineering or CAD visualization.

Anonymous1776225817

Anonymous1768726734

Anonymous1774588477

Anonymous1774451479

Anonymous1765467548

Прямоугольная шкатулка, с крышкой

3d model rectangular box

Anonymous1774209204

Прямоугольная шкатулка пустая внутри горизонтально расположенная

Anonymous1774209204

Anonymous1774245453

коробка с открывающейся крышкой на петлях ,герб с фото на крышке как гравировка ,размер коробки 150мм длина ,30 мм высота 100 мм ширина

Anonymous1773435277

коробочка прямоугольная с тремя секциями свысокими бортиками

Anonymous1773961788

Anonymous1773886731

Anonymous1773833072

철로된 소형 틴케이스 (네모난, 높이는 그렇게까지 높지 않은 적당한 틴케이스)

Anonymous1773552084

Anonymous1737620910

שהקופסא תהיה חלולה מבפנים , עם מכסה מתלבש עליון , מבחוץ תנקה את כל הטקסט שתהיה חלקה וריקה

Anonymous1773156057

3D白模参考图，一个被符箓贴满的打开盒子。盒子为基本几何体（立方体），盒盖翻开。无任何材质纹理，仅以灰色或白色半透明材质显示盒体结构。

符箓以扁平立方体或薄片形式呈现，密集堆叠、交错、卷曲，覆盖盒身内外。符箓薄片的边缘略微翘起、部分断裂，清晰展示其“粘贴”与“堆叠”的立体关系。符箓的布局逻辑清晰：外部完全覆盖，内部部分延伸，接缝处溢出。

视角与光照：多角度展示（建议生成一张主图加三张小视角图），均匀顶光与侧光结合，确保每一处结构阴影清晰。纯黑色背景。

品质：几何结构参考图，建模拓扑友好，8K，无材质干扰，专注形态。

Anonymous1767442766

Anonymous1770560642

Anonymous1750418455