Electronics enclosure 3D Models

Find the best Electronics enclosure 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

Anonymous1749596485

a platform on various components of robotics like arduino uno , lcd screen, different type of sensors , buzzer,led lights, batteries case , small bread board, small motors etc can be fixed in a dip on bed or can be tighten with small nut and bolt

Anonymous1756578157

Anonymous1756552685

Anonymous1756497762

Anonymous1756279848

Anonymous1755504015

Anonymous1755429192

Anonymous1747052405

Object: Create only the main body (base) of a rugged, two-part rectangular electronics enclosure. The final output must be a single, print-ready STL file named enclosure_base.stl.

Style and Core Dimensions:

Style: A functional, robust, open-topped box with slightly rounded external edges for durability.

External Dimensions: 195mm in Length, 85mm in Width, and 35mm in Height.

Material Properties: Design with a uniform wall thickness of 3mm throughout.

Internal Features:

Floor-Mounted Standoffs: All standoffs must be cylindrical, 5mm tall, with a 5mm diameter, and feature a central hole sized for an M2.5 screw.

Standoff Set 1 (for HackRF One): Create a set of four standoffs arranged in a rectangle measuring 150mm x 65mm. Center this rectangular pattern along the 195mm length of the enclosure. Position it so that one of the long edges of the pattern is exactly 10mm away from the enclosure's inner wall.

Standoff Set 2 (for Raspberry Pi): Create a second set of four standoffs arrang

Anonymous1755120526

3D Design Request – Snap-fit Assembly

Design a 3D model of the attached device, divided into separate parts with snap-fit joints (no screws), showing internal wiring for educational purposes.

Parts:

Base plate (Arduino, wires, battery).

Front panel (LCD, buttons, PIR sensor cutouts).

Back cover (removable).

Buttons: Red (Stress), Green (Heart), Blue (Tension), Black (ON/OFF).

LCD holder.

PIR sensor mount.

Battery holder.

Deliverables:

STL for each part.

Assembly file.

Exploded view.

Wiring diagram.

Notes:

Colors match reference image.

Easy assembly/disassembly for training.

Anonymous1753881195

I want a cover model that is 9 cm long, 6 cm wide and 3 cm high, has an empty cable entry on one side, has rounded corners, can be attached and removed, and whose attachable and detachable parts are identical.

Anonymous1740254140

Create a rectangular open-top enclosure for a microcontroller. The internal dimensions should be 100mm x 100mm x 50mm to fit the microcontroller. The outer shell should have 2mm thick walls on all sides except the top, which remains open. Add a rectangular cutout slot (40mm wide, 10mm high) on one of the longer sides near the bottom for cable or GPIO pin access. The enclosure should look clean, 3D-printable, and functional.

Anonymous1754307485

Anonymous1753698138

Anonymous1753265569

Anonymous1753087688

Anonymous1752952595

Anonymous1752933167

Anonymous1751417996