Futuristic ring 3D Models

Find the best Futuristic ring 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

Anonymous1728734445

一款用于 Apple Watch 的充电底座设计，整体为可 3D 打印的一体式结构。
造型风格采用金属流体与几何拓扑优化相结合的设计语言，结构呈现出流动感强烈的骨架式支撑形态，具有明显的负空间与中空结构。
底部宽大稳定，向上延展形成优雅的液态金属拱形结构，用于托举顶部的圆形 Apple Watch 磁吸充电盘。所有支撑筋条需具备可打印厚度，避免过细或悬空结构，整体为单一实体结构，适合直接打印。充电盘位置略微倾斜，适合床头柜夜间模式使用，顶部设有与 Apple Watch 原装充电饼尺寸匹配的圆形嵌位结构。
整体造型具有先锋前卫的未来感，融合参数化设计、拓扑结构与工业雕塑气质，风格中性，男女皆可接受。
表面光滑连续，适合 FDM 或光固化 3D 打印成型。
仅展示底座本体，不包含手表。

Anonymous1766771945

Anonymous1765534551

Anonymous1766592845

Anonymous1759833819

Crie um modelo 3D em STL, pronto para impressão 3D, de um Anel do Poder inspirado em Hot Wheels Acceleracers, versão túnel, permitindo que carros Hot Wheels escala 1:64 passem por dentro.

Escala e dimensões obrigatórias

Escala do cenário: 1:64

Diâmetro interno (vão livre): 75 mm

Espessura do anel: 20 mm

Diâmetro externo total: 115 mm

Profundidade total (eixo Z): 22 mm

Centro do anel perfeitamente alinhado no eixo X/Y.

Geometria do anel

Forma circular perfeita, sem ovalização.

Perfil do anel levemente chanfrado nas bordas internas e externas (chanfro de 1,5 mm a 45°).

Superfície externa segmentada em painéis, com sulcos técnicos inspirados em tecnologia futurista (estilo Acceleracers).

Sulcos com 1,2 mm de profundidade e 3 mm de largura, espaçados uniformemente.

Nenhum texto, logotipo ou símbolo gravado.

Núcleo de energia (interno)

Núcleo central esférico, flutuante visualmente (não conectado estruturalmente ao anel).

Diâmetro do núcleo: 38 mm.

Superfície lisa, sem detalhes, pensada para pintu

Anonymous1749507513

Anonymous1761296190

Anonymous1765869036

Anonymous1760873228

Anonymous1765668870

A 3D-printable universal rear-leg socket for a pig prosthetic, designed as ONE solid part. The inside is a rounded cavity sized for a 50×40 mm stump with 3–4 mm wall thickness and soft organic curvature so it can clamp to either the left or right back leg. The outside is a chunky sci-fi mechanical shell. On the back, add a tall “electronics backpack” with two internal compartments: an upper slide-in slot for a micro:bit (about 52×43×12 mm) and a lower removable battery sled (about 60×35×18 mm) that slides in from the rear and locks with a simple spring-tab latch. Along both sides, sculpt integrated cable channels and clip-shaped hooks so wires can be pushed in and held neatly. On the front bottom edge, create a flat mounting pad with a symmetric 4-hole M3 bolt pattern so the thigh frame can bolt on from either side. All geometry thick and printable, no thin spikes, one watertight solid.

Anonymous1765455517

Anonymous1749722301

Anonymous1765340772

Anonymous1765269153

Anonymous1764945894

Anonymous1755596172

Design a modern 3D-printable incense burner inspired by a traditional Bedouin “Bayt Shaar” tent, but with a futuristic and minimal aesthetic.

Main concept:
- Use the general silhouette of a Bedouin tent, but redesign it using clean geometric shapes (low-poly or modern curves).
- The top cover represents the tent roof. It should slightly lift or detach to place a metal cup inside for the incense.
- Create linear horizontal patterns on the sides inspired by the white-and-black lines of the traditional Bayt Shaar fabric.
- Integrate ventilation openings inside these line patterns, allowing smoke to escape naturally.

Innovation features:
- Smoke should exit in a stylized way: through slits resembling tent openings or from a small apex vent at the top.
- Optional glowing effect: allow a small LED base beneath to create a warm “campfire-in-a-tent” vibe.
- Add subtle Arabic geometric touches or minimal Sadu-inspired lines.

Structure:
- Two-piece design: base + removable tent roof.
- Internal cavity for a heat-res

Anonymous1764872510