Headstock 3D Models

Find the best Headstock 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

Anonymous1775059765

Anonymous1772299693

Anonymous1774234451

Anonymous1773393164

Anonymous1772366672

genera un torno horizontal con todos sus componentes

Anonymous1772505941

Anonymous1772239228

Paulinho Leite

Anonymous1771844430

Make ONLY a standard guitar HEADSTOCK hanger: backplate + short forked yoke. ABSOLUTELY NO lower shelf, no bottom support, no body rest, no hooks, no rails, no extra arms, no storage.

PART 1 WALL PLATE: gothic arch backplate, flat back, thickness 10–12 mm. Add 2 countersunk screw holes (5 mm clearance) spaced 90 mm vertically. Rounded edges, fillets.

PART 2 YOKE ONLY: mount near the TOP of the plate. Forked U-shape with a NECK SLOT for hanging behind the nut. Slot width 45–50 mm, depth 25–30 mm, height 25–30 mm. Arms length 45–55 mm, thickness 14–16 mm, large fillets, upward safety lips. Standoff 35–45 mm max. Add padding grooves on inner faces. Solid base block (45 mm wide) + 3 gusset ribs under the yoke.

No geometry below the yoke. Export STL with 2 separate parts.

Anonymous1770843198

Make a 3D printable FIXED GUITAR HEADSTOCK WALL HANGER. NOT a shelf. NOT a tray. NO platform. NO basket. NO storage.

Two parts:
1) Gothic arch WALL PLATE: flat back, thickness 10–12 mm, 2 countersunk screw holes vertically aligned (5 mm clearance) spaced 90 mm apart.
2) FORKED YOKE with NECK SLOT (standard guitar hanger): U-shaped fork with a slot where the neck rests behind the nut. Slot width 45–50 mm, slot depth 25–30 mm, slot height 25–30 mm. Arms thickness 14–16 mm, arms length 45–55 mm, upward safety lips at tips. Padding grooves on inner slot faces for rubber/silicone strips. Standoff from wall 35–45 mm MAX. Solid base block 45 mm wide with 3 gusset ribs under the fork.

Smooth radii everywhere, watertight manifold, minimal supports. Export STL with both parts separated.

Anonymous1770843198

Create a 3D printable HEADSTOCK guitar wall hanger (not a shelf). Two-piece design: 1) Gothic arch wall plate with flat back and 2 vertically aligned countersunk screw holes (5 mm clearance). Plate thickness 8–10 mm with filleted edges. 2) Separate FORKED YOKE that mounts to the plate: two arms forming a U-shape cradle for the headstock, opening 55 mm, inner radius padded contact surfaces with shallow grooves for rubber strips. Arms length 45–55 mm, arm thickness 12–15 mm, with upward safety lips at the tips. Yoke must have a solid base block 35–45 mm wide that meets the plate with large fillets and 2–3 reinforcing ribs under the arms. No thin parts, no spikes, smooth contact faces. Minimal supports. Watertight manifold. Export STL with both parts separated.

Anonymous1770843198

Anonymous1770052486

Anonymous1770489845

Anonymous1746029148

Anonymous1768421236

Anonymous1768679754

RAY