Hollow cylinder 3D Models

Find the best Hollow cylinder 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

Anonymous1769625407

"3D model of a suppressor entry chamber, 50mm long cylindrical open space, diameter 35mm, for gas expansion, integrate as front section of a larger assembly, printable plastic, STL output."

Anonymous1767377642

a cylinder two and a half inches long with a 10 mm hole all the way through the middle and a diameter of 13mm

Anonymous1768764808

Anonymous1768668975

Create a hollow cylindrical 3D object optimized for FDM 3D printing, with no sharp overhangs and no need for support structures.
High precision mechanical part, clean geometry, no textures.

Base dimensions:

Outer diameter of the cylinder: 17.5 mm

Total height of the cylinder: 15.5 mm

The object is hollow along its entire height and fully coaxial

Wall thickness:

From the bottom of the cylinder up to a height of 14.5 mm, the wall thickness is 2.4 mm

The remaining top section of 1.0 mm height has a wall thickness of 4.85 mm

Attached shape:

On the bottom end of the hollow cylinder (the side with 2.4 mm wall thickness), attach an axially aligned, smoothly rounded hollow cylindrical extension

The attached extension has:

Height: 5 mm

Outer diameter: 17.5 mm

Wall thickness: 2.5 mm

The transition between the main cylinder and the attached extension is smooth and rounded, suitable for support-free FDM printing

Technical requirements:

All dimensions are in millimeters

Anonymous1768590826

Anonymous1756484157

Anonymous1757041370

i need to make a piece of this inner head to fit as an adapter for custom heads

Anonymous1766612452

Anonymous1767385786

труба, с сквозным отверстием, красная текстура.

Anonymous1750275649

Anonymous1760535904

Anonymous1765351666

Create a smooth 3D model of a tapered cylindrical object: wide at the bottom and narrowing toward the top. The bottom has a rounded inward concave depression. The surface should be clean, symmetrical, with evenly distributed vertical segments. Shape should look like a hollowed, soft cone with a rounded inner cavity at the base

Anonymous1765238480

Crear una varilla de 1,5 mm de grosor y 13 mm de largo. Hacer dos agujeros de 0,5 mm cada uno, colocando uno de ellos a 3 mm de la cabeza y el otro a 7 mm de la misma cabeza.

Anonymous1716721253

Anonymous1764781186

crea un cilindro de 20 mm de altura con el diamietro de laimagen y 1 mm de espesor

Anonymous1762099849

Anonymous1763817013