Hydroponic 3D Models

Find the best Hydroponic 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

Anonymous1776534674

Anonymous1730125344

Anonymous1776525268

Anonymous1776464297

Anonymous1776438819

Anonymous1776381043

Anonymous1776155522

Create a cylindrical modular hydroponic tower segment with the following parameters:
Height 12 cm, outer diameter 34 cm, inner diameter 30 cm, wall thickness 0.4 cm.
Add three planting pockets equally spaced at 120 degrees around the cylinder.
Each pocket has a 5.2 cm circular opening, angled upward by 15 degrees, with a pocket depth of 7 cm.
The center of each opening is 6 cm above the bottom edge.
Add a twist‑lock system: three upper locking lugs (2 cm long, 1 cm wide, 0.5 cm thick) spaced 120 degrees apart, and three matching lower curved slots (1.2 cm wide, 2.5 cm curved path, 20–25 degree rotation).
Add an O‑ring groove on the top rim: 0.35 cm wide, 0.3 cm deep, located at approximately 33.2 cm diameter.
Add 3–6 internal vertical ribs, each 1.5–2 cm wide and 0.3–0.4 cm thick.
Add a shallow internal water channel behind each planting pocket (2–2.5 cm wide, 0.3–0.4 cm deep).
All edges should have fillets between 0.2 and 0.4 cm.
The part should be hollow, open at top and bottom, and

Anonymous1775905069

Anonymous1775483726

Anonymous1773928288

Anonymous1775567845

Créame un espacio donde se puedan tener cultivos , que tengan un sensor de temperatura , un sistema de ventilación y un sensor de nivel de agua

Anonymous1745581647

A single-piece technical 3D model of a rectangular water reservoir for a desktop hydroponic system. Dimensions: 170mm x 170mm x 90mm. Features: perfectly vertical 3mm thick walls, a flat solid bottom, and a 10mm wide U-shaped cutout on one top edge for a pump cable. The design must be a hollow open-top box with clean 90-degree internal corners and no internal structures. Optimized for FDM printing on a 180mm bed, manifold high-resolution mesh, zero supports required.

Anonymous1775416841

A high-precision, two-part modular hydroponic desktop grow box, optimized for the 180x180mm build plate of a Bambu Lab A1 Mini. Design features a watertight rectangular base reservoir and a matching removable lid with a professional lip-and-groove interlocking joint for a perfect snap-fit. Include a 0.2mm clearance tolerance between parts for a smooth assembly. The base includes an internal compartment for a small submersible water pump with a 10mm rear cable exit. The lid has two 50mm diameter holes for net pots. Minimalist industrial aesthetic, 3mm thick solid walls, flat stable base, zero-overhang design for a support-free flawless surface finish. Manifold high-resolution 3D mesh, optimized for FDM printing

Anonymous1775416841

A hydroponic Mini Garden where can place plants inside

Anonymous1775416841