Industrial warehouse 3D Models

Find the best Industrial warehouse 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

Anonymous1754403926

Anonymous1770184510

Anonymous1742276135

Anonymous1768479318

Create a realistic 3D model of a food-grade dry storage warehouse, rectangular and organized linearly, total width about 7 meters.

The warehouse contains five vertical storage zones from left to right, separated by narrow aisles, and one main horizontal circulation aisle at the front (1.5 meters wide).

Zone A (leftmost): blue-coded area for powdered spices.
Metal storage rack (1.5m wide, 0.6m deep), airtight containers on shelves.
Heavier items like salt and sugar stored on lower shelves.
Approximate area: 8.2 square meters.

Zone B: green-coded area for whole spices (grains, berries, roots).
Metal rack same size as Zone A.
Strict separation from powdered products.
Approximate area: 8.2 square meters.

Zone C (center): yellow-coded area for dried herbs and leaves.
Metal racks with ventilated or perforated shelves for airflow.
Approximate area: 8.2 square meters.

Zone D: orange-coded modular storage area for mixed materials and specialties.
Flexible metal shelving.
Approximate area: 7 square meters.

Zone E

Anonymous1769977863

Anonymous1769837405

Anonymous1769757606

Anonymous1769733590

Anonymous1769721247

Model the interior shell of an existing industrial retail building at 3635 E Colorado Blvd, Pasadena, CA using provided plans and sections. Use the actual building footprint from the floor plan (do not infer width/length from sections alone). Structure consists of 5 bays at 33 ft each (total 165 ft) aligned along the long axis. Exterior walls only; no façade redesign.

Roof is a gable (peaked) roof with the ridge running parallel to the long axis. Minimum clear height at eaves is ~16'–16'5", maximum clear height at ridge is ~29'9".

Model an exposed truss system (not flat or open span). Bottom chord aligns with clear heights; estimate 4–6 ft truss depth as a placeholder. Place trusses per bay rhythm and keep structure on its own layer/tag.

Anonymous1769727628

Anonymous1769718462

Anonymous1769686095

Anonymous1759233192

A modern industrial warehouse / logistics hall made of light gray corrugated metal panels on all sides. The building is a large rectangular single-story structure with a low-pitch gable roof made of light gray ribbed sheet metal. The roof has several evenly spaced rectangular skylights (dark glass). One long side of the building has five loading dock bays with yellow roll-up sectional doors, each surrounded by dark gray dock shelters and bumpers, with small number signs above each bay. Next to the loading docks there is a personnel entrance door with a small metal staircase and railing. The building has a concrete base/foundation strip around the perimeter. On the shorter side there is a red vertical metal ladder attached to the wall leading to the roof, plus a small service door and a few small square windows. The opposite side has a long horizontal strip window. Add simple industrial details like wall-mounted lights, vents, and small utility boxes. Clean realistic materials, sharp edges, neutral lighting, n

Anonymous1769553352

Anonymous1769480851

Anonymous1762839285

Anonymous1769421831