?

Jig 3D Models

Find the best Jig 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :
fixturejigglypuffhookhook-shaped
核心设计：在工装上直接加工出与气浮垫外形匹配的安装槽（定位基准），然后用压块和锁紧机构（如偏心轮或侧边螺钉）将其固定。 操作步骤： 精加工工装：在工装板上铣出多个沉槽，槽的尺寸和平面度是精度的基础。 放置垫片：清洁槽底后放入气浮垫。 压紧锁定：盖上压块，拧紧侧边的锁紧螺钉，或利用专用的快速锁紧机构将压块压死。 适用场景：需要高重复定位精度的多工位加工或检测。
Anonymous1776409492
A cutting jig that has a round shape, A flat bottom, with a platform that you cut against. The blades need to come to a V point on the top half. The top needs to push down, with a spring to push it back up. This will allow to cut a V into fabric.
Anonymous1775312448
Anonymous1770697902
Design a precision, two-layer jig optimized for 3D printing on a Bambu Lab A1, intended for use inside an xTool F2 laser engraver. The jig must securely hold multiple pens or pencils in a flat, repeatable position for batch engraving, while fitting cleanly into the machine’s removable baseplate cavity. Overall dimensions and structure: The jig must be square with final outer dimensions of 107.7 mm × 107.7 mm to allow a snug but non-binding fit inside the xTool F2 cavity. Total height must be 14 mm. The model consists of two integrated layers forming a single printable part. The bottom base layer must be 5 mm thick and completely flat to ensure stability when placed inside the engraver. The top functional layer must be 9 mm thick and sit directly on top of the base, forming a combined solid structure. All geometry should be manifold and watertight, suitable for direct STL export and slicing. Pen slot configuration: The top surface must contain 10 parallel slots designed to hold pens
Anonymous1774442912
A custom pen and pencil engraving jig for an xTool F2 laser engraver, holding 10 pens laid flat in parallel grooves. Base: Square 107 × 107 × 5 mm, corners slightly rounded (~1 mm). Grooves: 10 horizontal channels, 2 rows of 5. V-shaped (~90°) with top opening 12 mm and depth 4 mm. Each groove includes a 1 mm flat edge to prevent pen rotation. Center-to-center spacing: X = 22.75 mm, Y = 25 mm; grooves centered on base. Optional 2 mm end stops at groove ends to prevent pens sliding. Logo: Front vertical face engraved/embossed with your PIXEL PRESS LAB logo. Logo angled diagonally upward (~25°), recessed or raised ~0.8 mm. Style & Print: Functional, clean aesthetic; edges lightly filleted (0.5–1 mm). Optimized for FDM 3D printing: watertight, manifold, smooth surfaces, no overhangs >45°. Material: matte PLA or ABS, neutral color. Real-world scale in millimeters.
Anonymous1774442912
A custom horizontal pen and pencil engraving jig compatible with an xTool F2 laser engraver. The jig holds 10 pens and pencils laid flat in parallel channels for consistent laser engraving, directly inspired by typical pencil jigs like those used for hex pencils. Base: A square plate, 107mm × 107mm × 5mm, with slightly rounded outer corners (≈ 1 mm). Grooves: The top surface contains 10 parallel channels running left‑to‑right for pens/pencils to lie flat. Each channel is sized to cradle round pens: V‑groove with 90° included angle, top opening ≈ 12 mm, depth ≈ 4 mm. A flat alignment edge or micro groove (≈ 1 mm wide) runs along one side inside each channel to prevent the pens from rotating, ensuring consistent engraved orientation. Channels are arranged in 2 rows of 5, with spacing: Center‑to‑center X spacing: 22.75 mm Row Y spacing: 25 mm Outer margins are balanced so the channels are centered on the base. Optional end stops (≈ 2 mm high) at each groove end to keep pens from slidin
Anonymous1774442912
Anonymous1753981962
Anonymous1766968565
Anonymous1773514847
Anonymous1745419341
Anonymous1773587504
Anonymous1771930364
Anonymous1772957538
Drilling jig
Anonymous1772953127
Prompt for 3D Model Generation: Door Lock Drilling Jig Goal: Create a functional, high-precision drilling guide (Jig) for door hardware installation. 1. Main Structure: Type: U-shape / C-clamp sleeve. Application: To be mounted over the edge of a door. Internal Slot Width (Door Thickness): 45mm (with 1mm tolerance for easy fit). Overall Dimensions: Height 160mm, Width 70mm, Wall thickness 8mm (for rigidity). 2. Hole Layout (Front Face): Primary Center Hole: Diameter 25mm, positioned at a 60mm backset from the door edge. Top/Bottom Mounting Holes: Diameter 10mm, aligned vertically. Vertical Spacing: 130mm distance between the centers of the top and bottom holes. 3. Side Alignment (Edge Face): Latch Hole: A 25mm diameter hole centered on the side face, aligned with the primary front hole. 4. Visual & Functional Features: Alignment Notches: Small V-shaped cutouts on all 4 sides to mark the exact center lines. Embossed Labels: Add "60mm" text near the main hole and "TOP" on the upper part. Grip: He
Anonymous1772918327
é um jig de pesca na imagem tem a vista de frente e de cima
Anonymous1760992196
Anonymous1772135697
Pike jig lure with penis head
Anonymous1749099943
Enter invite code to get credits!