Lobster clasp 3D Models

Find the best Lobster clasp 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

Anonymous1738219686

이성국

Anonymous1757768389

Anonymous1762236999

Anonymous1761560828

Anonymous1761527794

Anonymous1761732267

Anonymous1761544065

Anonymous1761400635

Anonymous1761400635

Anonymous1761075037

Anonymous1761136749

Anonymous1760421260

Anonymous1760979140

繪製一隻代表巨蟹座的Q版吉祥物，頭戴著眼睛凸出的螃蟹帽子，粉紅色的帽子上具有兩隻大螯以及三對腳，其中一對腳像圍巾一樣垂到吉祥物的衣服，這隻吉祥物身材微胖，一隻手握著鏟子，另一隻手握著平底鍋，表情有點害羞又無言，衣服中間有個房子的符號，房子中有愛心，他穿的鞋子很像荷蘭木鞋。

Anonymous1760979726

Anonymous1758485680

Create a cooked, stylized shrimp matching the reference look (gentle “C” curve, short tail, smooth ring segments), but as a hollow shell that is openable for later filling.
Units: millimeters. Scale: 1:1. Axes: +X = length (head→tail), +Z = dorsal/up. Origin at geometric center.
Target size: total length 90 mm, max width 28 mm, max height 18 mm.
Wall thickness: uniform 2.5 mm (±0.2 mm).
Exterior: smooth “C” curve; 7–8 shallow rings (~0.6 mm grooves), soft sheen; no fragile appendages (no antennae/legs/eyes). Short rounded rostrum.
Interior: continuous smooth cavity preserving 2.5 mm walls; no sharp edges.

OPENING (clam-shell for filling): produce two halves (left/right) split along the YZ plane (parting line at mid-thickness) so they close like a clamshell.
– Add a perimeter tongue-and-groove joint around the entire split: tongue 1.2 mm wide × 1.0 mm tall, with 0.30 mm radial clearance to the groove for easy press-fit.
– Include 4 alignment keys (conical Ø6→5 mm, 2.5 mm depth) spaced along the perimeter, alternating pin/socket between halves.
– Apply draft angles: 2.0° external, 1.0° internal, pulling away from the parting line.
– Minimum fillets: R0.8 mm outside, R0.5 mm inside.

Filling port (optional): add a Ø8 mm fill hole hidden at the head end, with 1×45° chamfer and a Ø10×1.5 mm recess to accept a plug (do not model the plug).
Vents (optional): two Ø1.0 mm vents near the tail tip for air relief.

Mesh/output: export two STL parts (left and right halves), watertight/manifold, no self-intersections, no flipped normals; all normals outward. Tessellation fine enough for 0.6–0.8 mm radii without over-triangulation. Orient each half with length along +X and back along +Z.
Exclude: no bases/supports, no text, no inserts, no hinges; closure is via the perimeter press-fit.Units: millimeters. Scale: 1:1. Axes: +X = length (head→tail), +Z = dorsal/up. Origin at geometric center.
Target size: total length 90 mm, max width 28 mm, max height 18 mm.
Wall thickness: uniform 2.5 mm (±0.2 mm).
Exterior: smooth “C” curve; 7–8 shallow rings (~0.6 mm grooves), soft sheen; no fragile appendages (no antennae/legs/eyes). Short rounded rostrum.
Interior: continuous smooth cavity preserving 2.5 mm walls; no sharp edges.

OPENING (clam-shell for filling): produce two halves (left/right) split along the YZ plane (parting line at mid-thickness) so they close like a clamshell.
– Add a perimeter tongue-and-groove joint around the entire split: tongue 1.2 mm wide × 1.0 mm tall, with 0.30 mm radial clearance to the groove for easy press-fit.
– Include 4 alignment keys (conical Ø6→5 mm, 2.5 mm depth) spaced

Anonymous1760616383

Anonymous1760611686