Nozzle 3D Models

Find the best Nozzle 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

Anonymous1772930034

Anonymous1755893015

Anonymous1772726719

Anonymous1776759684

Anonymous1745284042

Design a high-efficiency 3D printable mist spray nozzle optimized for a low-pressure 3–5V DC micro water pump system. The design must prioritize real-world fluid performance, manufacturability using FDM 3D printing, and proper watertight mesh generation for STL export. The nozzle must function as an internal press-fit connector for flexible tubing with an inner diameter of 5.54 mm. The inlet outer diameter should be 5.55 mm with a tolerance of ±0.05 mm to ensure a snug friction fit while accounting for printer inaccuracies. Include a lead-in chamfer of 0.3–0.5 mm at approximately 45 degrees to assist insertion. The inlet engagement length must be at least 10 mm for a secure, leak-resistant connection. Optionally include one or two shallow annular ridges of about 0.2 mm height for improved grip.

The total nozzle length should be constrained between 18 mm and 20 mm. The external diameter should not exceed 8 mm, and the minimum wall thickness must be at least 1.2 mm throughout the model.

Anonymous1776747236

Design a compact, 3D-printable mist spray nozzle optimized for a low-pressure 3–5V DC micro water pump.

Mechanical Interface:
- The nozzle must be an internal press-fit connector for flexible tubing with inner diameter 5.54 mm.
- Inlet outer diameter: 5.55 mm (tight friction fit, tolerance ±0.05 mm).
- Include a slight 0.3 mm chamfer at the inlet edge for easy insertion.
- Inlet length: 10 mm minimum for secure grip.

Overall Geometry:
- Total nozzle length: 18–20 mm.
- Outer body diameter: 8 mm.
- Minimum wall thickness: 1.2 mm throughout.

Fluid Path Design:
1. Converging section:
- Smoothly reduce internal diameter from 5.55 mm to 1.5 mm over ~8 mm length.
- Use a continuous conical or curved transition (no sharp steps).

2. Swirl chamber:
- Cylindrical cavity: 3 mm diameter, 2 mm height.
- Positioned just before the outlet.

3. Tangential inlets:
- 2 or 3 micro-channels (0.8 mm diameter each).
- Enter the swirl chamber tangentially (offset from center) to induce

Anonymous1776747236

Anonymous1776703901

Anonymous1776695576

A pointed ogive shape, base diameter exactly 52mm, total height 150mm, with a 50mm long cylindrical shoulder of 51.5mm diameter for precise fit, smooth closed outer shell with 2.2mm wall thickness, internal honeycomb structure for reduced weight, small attachment loop inside the tip, manifold watertight mesh, suitable for 3D printing, clean geometry

Anonymous1776572717

Anonymous1776561794

a UK petrol gas station nozzle that can be used for a garrysmod SWEP it should have c_hands with it and everyyihng too please

Anonymous1768941881

Anonymous1762161026

Anonymous1776529462

Anonymous1774900222

Anonymous1773266872

Anonymous1739994934

Anonymous1732380063