Pan tilt 3D Models

Find the best Pan tilt 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

A highly detailed 3D model of a DIY matte black 3D-printed robotic pan-tilt turret stand. The base features two stacked circular rings separated by short vertical spacer pillars, with a central hub housing a panning motor. A distinct, flat rectangular vertical post extends straight up from the front edge of the lower stationary ring. Rising from the rotating upper ring are two tall, parallel A-frame towers. Each tower is a flat structural lattice consisting of a triangular outer frame filled with a prominent internal 'X' shaped cross-brace. The apex of each A-frame tower features a rectangular junction plate with two visible screw holes. Extending upwards and hooking sharply outwards from this junction is a thick, J-shaped upper bracket, terminating in a flat edge with two additional mounting holes. A rectangular servo motor is mounted to the exterior face of the right tower's J-bracket. Suspended between these top brackets is a custom pivoting cradle. The material is FDM 3D-printed pl

Anonymous1775398777

A detailed 3D model of a DIY 3D-printed robotic pan-tilt turret stand. The base consists of two stacked circular rings separated by short vertical spacer pillars, with a central hub housing a panning motor. A distinct, flat rectangular vertical post sticks straight up from the front edge of the lower base. Rising from the rotating top ring are two tall, parallel A-frame towers. Each tower is a structural lattice featuring a thick outer triangular frame filled with a prominent internal 'X' shaped cross-bracing. At the apex of both towers are horizontal pivot brackets. The right bracket has a rectangular servo motor mounted to its exterior face. Between the top brackets sits a custom pivoting cradle. The material is matte black FDM 3D-printed plastic with visible horizontal layer lines

Anonymous1775398777

Anonymous1766685570

Anonymous1763735391

Anonymous1771773523

Anonymous1773813936

Design a pan-tilt tracking turret system with the following specifications:

- The system should have 2 degrees of freedom (pan and tilt).
- Use servo or brushless motors for actuation, with proper gear reduction for high torque and smooth motion.
- The structure must be rigid and optimized for minimal vibration.
- Include a mounting platform on top designed to hold a modular payload (such as a camera or lightweight device).
- The center of gravity should be aligned with the rotation axes for stability.
- Include bearings for both axes to ensure smooth rotation.
- Design should be suitable for outdoor use and allow easy assembly.

Additional requirements:
- Provide full 3D CAD model
- Include exploded view of parts
- Suggest materials (aluminum, PLA, carbon fiber etc.)
- Show motor placement and cable routing
- Ensure the design can support dynamic tracking of moving targets

Anonymous1773788892

Anonymous1752857071

Design a mechanical pan-tilt turret for a thermal security camera system.

Requirements:

The system must support a cylindrical thermal camera weighing 2 kg and approximately 200 mm long and 70 mm diameter.

The turret should include two axes:
- Pan axis with full 360° rotation
- Tilt axis from -20° to +90°

Base structure:
- Square base plate 200 mm × 200 mm
- Thickness 6 mm
- 4 mounting holes for pole mounting (8 mm diameter)

Pan system:
- Lazy Susan bearing with diameter 120 mm
- Pan rotating plate diameter 160 mm
- NEMA23 stepper motor driving the pan axis
- Timing belt drive with 4:1 reduction ratio
- Motor mounted on base plate

Tilt system:
- U-shaped aluminum frame mounted on the pan plate
- Frame width 120 mm
- Frame height 100 mm
- 5 mm aluminum thickness

Tilt axis:
- 8 mm steel shaft
- two ball bearings
- NEMA17 stepper motor for tilt control

Camera mount:
- adjustable clamp mount for cylindrical camera
- centered on tilt axis for balance

Additional components:
- cable routing hole in center of

Anonymous1773475221

mechanical pan tilt turret for security camera
200mm square base plate
lazy susan bearing
nema23 pan motor
nema17 tilt motor
camera mount for cylindrical camera
aluminum frame
200mm base plate
stepper motor driven
camera mount

Anonymous1773475221

Anonymous1741491604

Anonymous1773211557

Anonymous1773073926

Generate a 3D printable Pan-Tilt servo mount with the following specifications:

DESIGN STYLE: Industrial mecha / robotics aesthetic. Sharp angular geometry with
hexagonal facets, visible structural ribs, and engraved panel lines. Think sci-fi
weapon turret meets precision engineering tool.

COMPONENTS (4 separate STL parts):

PART 1 — PAN Bracket (rotates with servo 1):
- U-shaped yoke, 70mm wide, 50mm tall arms
- Each arm has 10mm circular boss for TILT servo axle
- Structural ribs on outer faces (1.5mm raised, 5mm spaced)
- Snap-fit attachment to servo horn
- Engraved "PAN" text and directional arrow on side face

Anonymous1771200313

Anonymous1772819191

Anonymous1772795231

Anonymous1759886439

Anonymous1772220368