Perforated 3D Models

Find the best Perforated 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

three-dimensional perforated shell structure, freestanding object, neutral industrial artifact, curved volumetric form without recognizable anatomy, forward-projecting dome-like geometry, open interior cavity, no symmetry emphasis, no decorative motifs.

Surface covered with dense and irregular field of circular holes of varying diameters, mixed with elongated slots and keyhole-shaped cutouts, non-uniform spacing, rhythmic but non-grid pattern.

Material appearance: matte industrial polymer or composite sheet, medium thickness, slightly textured surface, subtle manufacturing marks, edges softly chamfered, corners rounded, no sharp points.

Structural detailing: shallow reinforcing ribs, local thickening around clusters of perforations, corrugated undulations for stiffness, visible logic of load distribution, tool-like construction aesthetic.

Perimeter defined by a thickened rim with occasional notches and scalloped segments, suggesting attachment and modification potential.

Object appears modular, hackable,

Andrei Kovalev

wearable facial platform cage, pegboard face structure, no human face visible, no inner padding, no straps, front-facing object, neutral studio background, industrial experimental design, sculptural mask base, abstract facial volume without features, forward-projecting dome shape, rounded trapezoid silhouette, asymmetric tolerance, no eyes nose mouth implied, perforated surface covered with irregular hole system, multiple hole sizes mixed randomly, small stitching holes medium bolt holes large knot holes, non-uniform spacing, rhythmic but imperfect pattern, elongated slots and keyhole cutouts integrated into surface, curved slots following surface flow, thickened perimeter rim with notches and scalloped edges, reinforced edge geometry for wrapping and lashing, shallow structural ribs and corrugations visible on surface, subtle undulating stiffness patterns, raw utilitarian aesthetic, tool-like construction surface, hackable modular platform, matte neutral material, HDPE or nylon-like plastic appearance, sligh

Andrei Kovalev

Anonymous1731757591

Anonymous1740635402

Anonymous1743406991

Anonymous1761035081

Anonymous1764196611

Anonymous1758282346

生成一个8厘米直径 4厘米高的这样的鱼虾躲避屋。底部和圆柱体侧壁上的孔洞是大致 2毫米到3毫米的随机生成就可以。需要2毫米和3毫米洞是不规则分布的。

Anonymous1758853094

直径8厘米高4厘米孔洞为2-3毫米。空洞不规则形状分布在底部平面和圆柱上。底部和圆柱连接处紧密一些。空洞连接要厚实一些。不能出现断裂或薄的地方。

Anonymous1758853094

生成一个直径8厘米高4厘米不规则镂空洞2到3毫米的一个圆柱模型。不要出现大面积平面连接。均匀分布镂空洞。顶部为空。圆柱和平面接触的地方一定要紧密厚实平整一些。

Anonymous1758853094

我需要做一个我手里的这个空心的瓶子，瓶身有0.5CM直径的空洞若干个，直径 3CM，总长5CM，厚度你自己看着搭配。瓶盖顶部圆的中心位置只有，有一个1毫米的小洞。

Anonymous1760589871

Anonymous1759654038

Anonymous1749474037

- 参数设计：保护层呈矩形罩状，尺寸与整体装置相匹配（示例约10×10×4 cm）。框架壁厚适中（如3–5 mm），使用强度高、耐腐蚀的塑料（测试材料为PETG，理想材料可选PEEK）。四个侧面均均匀布置圆形通孔，孔径约1 cm，保证水流和小颗粒可自由通过，同时阻挡大体积沉积物。整板设计采用刚性框架和加固筋，以抵抗潮汐冲击，确保结构稳定。
- 结构设计：该保护罩由四块开孔壁板和顶端端盖板组合而成，构成一个坚固的“笼子”或“箱体”结构。壁板之间可采用卡扣或螺钉连接，整体可拆卸组装。框架边缘和节点位置加设加强筋或肋条，以提高抗扭扭和抗冲击性能。壁板材料均匀开孔，内部可另加网格或滤网作为补充过滤层。整体设计强调简单可靠，使组装维护方便。去掉底部。

Anonymous1758364949

Anonymous1743406991

Anonymous1768216497