Plastic enclosure 3D Models

Find the best Plastic enclosure 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

Anonymous1772804013

Anonymous1774014435

Anonymous1775846273

Anonymous1775719439

Anonymous1775720707

rvcbl

Anonymous1775191183

BASE

Size: 130 × 130 × 50 mm
Wall thickness: 3 mm
Bottom thickness: 3.5 mm
Inner cavity: 124 × 124 × 46 mm
Corner radius: 6 mm
Add 4 corner screw bosses: Ø6 mm, height 8 mm, hole Ø3 mm
Side rails (for sliding cover): 2 mm thick, 3 mm height
Front stopper: 3 mm height

Anonymous1775290191

Anonymous1774997815

Anonymous1774889788

Design a spacious two-piece electronics enclosure made entirely of plain plastic geometry. The case must be generously sized — do not make it compact or tight. There must be at least 25mm (1 inch) of clearance around every component zone on all sides for wire routing, hand access, and cable management. Cramped = wrong.
CRITICAL — READ FIRST:

This model contains ONLY plastic parts. No PCBs, no electronic components, no circuits, no solder joints, no chips, no wires, no connectors, no metal parts of any kind are to be modeled or appear anywhere in the scene
The colored zones are simply flat colored plastic floor surfaces painted onto the base tray floor — they are just colored rectangles recessed 0.5mm into the floor surface to visually indicate where a real component will be placed later by hand
Do not model, imply, or suggest any electronic component in any way. If it has circuits on it, do not include it

Overall dimensions: 180mm (L) × 160mm (W) × 60mm (H), wall thickness 2.5mm, internal corners filleted

Anonymous1773951132

Design a compact two-piece electronics enclosure made entirely of plain plastic geometry.
CRITICAL — READ FIRST:

This model contains ONLY plastic parts. No PCBs, no electronic components, no circuits, no solder joints, no chips, no wires, no connectors, no metal parts of any kind are to be modeled or appear anywhere in the scene
The colored zones are simply flat colored plastic floor surfaces painted onto the base tray floor — they are just colored rectangles recessed 0.5mm into the floor surface to visually indicate where a real component will be placed later by hand
Do not model, imply, or suggest any electronic component in any way. If it has circuits on it, do not include it

Overall dimensions: 110mm (L) × 80mm (W) × 40mm (H), wall thickness 2mm, internal corners filleted 1mm, external corners filleted 2mm. Every part is plain grey plastic except the three colored floor zones.

BASE TRAY — plastic only:
Floor has three recessed colored zones, each 0.5mm deep, flat, no detail inside them:

Solid blue re

Anonymous1773951132

Anonymous1770294724

Anonymous1770739938

Anonymous1772377565

Anonymous1773298450