?

Robotic fish 3D Models

Find the best Robotic fish 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

swordfish robotic-lobster transparent-robotic advanced-robotic

Anonymous1770382924

BreakinScales

Anonymous1769987017

Anonymous1747068785

Anonymous1769646639

Anonymous1749454962

Anonymous1752287201

Anonymous1766647066

Anonymous1756177237

Anonymous1756177237

体型：参考鲫鱼/鲤鱼的流畅体态，长约40-45厘米，最大横截面宽约15厘米，呈纺锤形，减少前进阻力。
· 外壳：分为上下两部分。上壳体为光滑流线型穹顶，覆盖主要电子舱；下壳体平坦，便于安装传感器与保持稳定。外壳整体采用哑光深灰色或墨绿色（仿水生生物保护色），表面可添加不规则斑点，进一步增强隐蔽性。

2. 核心特征设计

· 驱动系统：
· 仿生胸鳍（一对）：位于机身两侧前部，采用两关节舵机驱动（MG996R），可实现复杂角度的划动与摆动，实现前进、后退、转向、悬停及精细姿态调整，模拟真实鱼类的机动性。
· 仿生尾鳍（一个）：位于机身尾部，作为主要推进器，采用大扭矩舵机驱动，进行左右摆动产生主要前进动力，效率高且水流扰动小。
· 感知与功能模块布局：
· 头部：集成广角低光摄像头（位于“鱼嘴”上方，仿生鼻孔位置）与多参数水质传感器探针（从“下唇”伸出）。
· 背部：设有可伸缩通信天线（LoRa/4G）与GPS模块，收拢时与背鳍造型融合。
· 腹部：设有超声波避障/鱼群测距传感器及LED警示灯（报警时亮起）。
· 侧线系统：机身两侧各嵌入一排微型压力传感器，封装成条状，模拟生物侧线，感知周围水流变化和近距离物体。
· 内部布局：
· 前部密封舱：主控（ESP32-S3）、边缘计算核心、电源管理。
· 中部密封舱：电池（5000mAh锂电池）。
· 后部密封舱：驱动舵机控制器、无线通信模块。
· 各舱室间通过防水接插件连接，实现模块化快拆维护。

3. 视觉风格渲染

· 造型：圆润流畅，无尖锐棱角，所有传感器开口均做平滑过渡处理，避免挂载水草。
· 材质表现（渲染建议）：外壳使用类肤质哑光材质，略带水润反光感；鳍片采用半透明柔性硅胶材质，可看到内部骨架结构，科技感与生物感结合。
· 配色方案：主色为深灰蓝，背部渐变为深墨绿，腹部为浅灰色，模拟自然界鱼类的伪装色。

Anonymous1765424104

. 宇宙残存的记忆鲸（Memory-Drift Leviathan Fragment）

关键词：
漂浮的巨大鲸型截面、只保留头部与一段脊骨、外层为柔软星云组织、内部渗透机械节点和反射片、有雾状记忆纹理在体表缓慢流动、发着低亮度柔光、适合作为大型独立模型、深层蓝紫渐变

Anonymous1764590608

Anonymous1751864118

Anonymous1743190284

A large realistic aquaculture fish-farm tank, circular or rectangular, made of concrete or strong plastic, filled with natural freshwater fish such as tilapia, carp, and mullet. The water should look real with slight turbidity, aeration bubbles, oxygen pipes, and natural farm lighting. Add inside the tank one small futuristic robotic smart fish that moves like a real fish, with a smooth metallic body, transparent sections, blue glowing sensors, and a small embedded camera. The robotic fish is designed to measure water pollution, pH, oxygen levels, and detect sick fish. Make the entire scene highly realistic, clean 3D geometry, suitable for Blender (OBJ/FBX/GLB).

Anonymous1764935173

A large realistic aquaculture tank filled with real natural freshwater fish (tilapia, carp, mullet) in a fish-farm environment. Add an advanced robotic smart fish inside the tank, with metallic body plates, soft LED lights, built-in water sensors, oxygen and pH probes, and a micro camera for detecting sick fish. The robotic fish should move like a real fish and look integrated in the environment. Highly realistic underwater lighting and clean 3D topology, Blender-read

Anonymous1764935173

Side-view of a 3-segment jointed fishing lure shaped like a small baitfish, total length 100 mm. The lure is made from a single piece of semi-matte TPU-like plastic. The body is divided into three segments separated by narrow 2 mm gaps, but at the top of the back and at the belly each gap is bridged by thin flexible plastic strips, so the lure can bend in an S-shape.
The head segment is about 35 mm long with a slightly rounded nose and a subtle gill plate, no diving lip. The middle segment is about 35 mm, and the tail segment is about 30 mm and ends in a wide paddle tail. At the thickest point the body is about 22 mm high and 10 mm thick, tapering slightly toward the tail.
There are no metal parts, no hooks, no eyescrews – only the plastic body. Simple color scheme: translucent milky white with a slightly darker stripe along the back. Clean white background, orthographic flat side view, technical concept illustration showing the lure clearly and centered.

Anonymous1764705682

cyber punk robotic fish

Anonymous1761031148