Sealing 3D Models

Find the best Sealing 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

Anonymous1776410337

Anonymous1775833183

Anonymous1775384383

"Create a complete wax seal stamp with a handle and a round stamp head. The handle should be ergonomic and attached to the center of the stamp. The head should include a raised, mirrored cursive letter 'D' designed for wax sealing. The model must be suitable for 3D printing."

Anonymous1775286746

Anonymous1774182342

Create a clean 3D render of a circular cable sealing insert made from EPDM rubber (55 Shore A, matte black).

Geometry:

Round disc shape (not square)

Outer diameter: 100 mm

Thickness: 30 mm

Design:

Single central cable hole (range 24–60 mm)

Concentric stepped sealing rings around the hole

One narrow radial slit from outer edge to centre (closed/tight fit, not open gap)

Three evenly spaced fixing holes near outer edge (on circular pattern)

Style:

Industrial product render

Neutral background

Slight angled perspective + optional top view

No logos or extra features

Important: The part must be a round EPDM insert, not a square flange or plate.

Anonymous1773746682

Create a clean 3D render of a cable sealing insert made from EPDM rubber (55 Shore A, matte black). Outer diameter 100 mm, thickness 30 mm.

Design:

Single central cable hole (range 24–60 mm)

Concentric stepped sealing rings around the hole (cut-to-fit membrane)

One narrow radial slit from outer edge to centre (closed/tight, not open gap)

Three evenly spaced fixing holes near outer edge

Style:

Industrial product render

Neutral background (white/grey)

Slight angled perspective + optional top view

No logos or unnecessary text

Model should look realistic and suitable for supplier reference, not artistic.

Anonymous1773746682

Anonymous1773795517

A simple plastic kitchen food bag sealing clamp clip. Long slim rectangular design, about 12 cm long, matte green plastic. Two flat arms connected by a flexible hinge on one side and a snap lock on the other side. Inside the clamp are three shallow horizontal grip ridges for holding a bag. Smooth rounded corners and minimal molded plastic details.

On the top surface near one end there is a small rotating circular dial wheel used to select the day of the week. The dial is recessed slightly into the plastic body and has a textured edge for grip. The wheel is divided into seven labeled segments: MON, TUE, WED, THU, FRI, SAT, SUN.

Next to the wheel on the clamp body is a small triangular indicator arrow pointing to the selected day.

Clean product design, realistic molded plastic kitchen gadget, simple geometry, centered object, white studio background, product-style 3D model.

Anonymous1773587023

Anonymous1773165165

SerHenry

阳极侧密封与导流框架 (ASMF)
材料：PPSU（聚苯砜），耐温180°C，耐碱，尺寸稳定。
厚度：1.2 mm（含密封槽深度）。
外形尺寸：200 mm × 150 mm，中间镂空区为反应区，镂空尺寸 170 mm × 120 mm（比反应区略大，留出密封边）。
关键结构：
• 密封槽：在框架上表面和下表面各有一圈矩形密封槽，用于安装O型圈。槽宽 1.2 mm，槽深 0.8 mm（压缩后O型圈压缩率25%），槽中心距边缘 5 mm。密封线宽 2 mm。
• 灌注通道网络：
o 主灌注口：位于框架侧面，M3螺纹孔，用于连接灌注设备。
o 环形分配流道：在框架内部靠近镂空区四周，加工出宽 0.5 mm、深 0.3 mm 的环形流道，与主灌注口连通。
o 分支流道阵列：从环形流道向镂空区内侧引出若干条分支流道，宽度 0.3 mm、深 0.2 mm，间距 5 mm，每条分支流道末端对应一个PI膜边缘孔位置。
• PI膜边缘孔对位区：在框架下表面（与IEFB接触面），对应分支流道末端位置，加工有直径 0.3 mm、深 0.2 mm 的沉孔，用于容纳PI膜边缘孔，确保凝胶溶液能准确进入PI膜。
• 定位孔：在框架四角设有直径 2 mm 的定位销孔，与其它层定位孔配合，精度 ±5 μm。
• 安装孔：在框架四周设有若干直径 4 mm 的通孔，用于穿过紧固螺栓。

Anonymous1772766407

Anonymous1772752827

Rectangular vacuum sealer machine, commercial food packaging equipment, stainless steel body, long sealing bar, transparent lid, control panel with buttons, countertop appliance, professional kitchen equipment, realistic PBR textures, game asset style, high detail

Anonymous1772068052

Anonymous1771696266

Anonymous1771518125

Anonymous1771518125

Anonymous1756343461