Sensor 3D Models

Find the best Sensor 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

Anonymous1774847296

Anonymous1765133501

Generate a precise 3D engineering model, presented in a clean studio orthographic view, of the spherical sensor pod from image_0.png. The design must be optimized as a 3D-printable prototype using matte gray PETG filament, showing minimal layer lines and realistic screw holes. A single MG90S Micro Servo (black body, metal gear spline) is mounted flat and stationary against the internal side wall of the sphere. Crucially, the internal cradle holding the Raspberry Pi Camera Module 3 and the VL53L1X LiDAR (identifiable side-by-side) must be oriented so their lenses point out through the front vertical viewing slot, perpendicular to the servo's axis. The black servo horn is directly connected to the side of the cradle, enabling vertical pitch (up and down tilt) as the servo rotates. The entire structure must look functional and modular, clearly showing accessible mounting brackets and wire routing channels. Avoid cinematic lighting or mass-produced metallic effects.

Anonymous1776672434

Anonymous1775657494

Anonymous1776667302

Anonymous1776420402

Anonymous1776613034

Anonymous1776523307

Anonymous1776153997

Anonymous1774633841

Sensor mount bracket with base plate, mounting holes, two vertical struts, top platform, and open cable slot in one strut. Metal part.

Anonymous1776488975

Anonymous1776498226

Anonymous1772141433

Anonymous1773097704

Outdoor IoT security sensor housing. Hard surface product design,
clean industrial aesthetic, 3D print ready, manifold mesh.

OVERALL SHAPE:
A three-part form: flat-top disc head, cylindrical stem,
tapered ground spike. Total height 320mm.
Vertical axis of symmetry.

HEAD (top section):
Flat circular disc, diameter 130mm, total height 42mm.
Completely flat top surface — flush, no dome, no curve.
Top surface has a recessed rectangular solar panel area,
inset 2mm, 110mm x 30mm, covered with photovoltaic grid
texture (thin raised grid lines 3mm spacing).
Bottom edge of disc has a 4mm drip edge overhang,
angled slightly downward (5 degrees) to deflect rain.
Underside of disc is flat with a 60mm diameter circular
opening where the stem connects — no gap, seamless joint.

STEM (middle section):
Cylindrical, outer diameter 60mm, height 162mm.
Slight vertical ribbing texture: 8 shallow ribs (1mm deep),
evenly spaced around circumference.
Features on stem surface:
- One circular flush window, d

Anonymous1776421719

Anonymous1762332176

Anonymous1776387414