View Plans

Test 3D Models

Find the best Test 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :
experimentmeasurementengineeringlaboratorysciencetoolsoftwareinspectiondatadevice
test tube 3d model: glass test tube with measurement markings and scale on clear glass
Test Tube 3D Model
四立柱试验系统3d模型: 采购一套四立柱试验系统，用于汽车底盘的台架在环试验，要求生成一张表述设备构成的三维图：直线电机驱动的四立柱试验系统放置在长宽为5m*10m的铁地板上，单个立柱的高度为1.5m，四个立柱布置点在3m*1.9m矩形的四个角上，前、后两个立柱中间处各布置一个长宽高为0.8m*0.8m*2.5m的反力支架，在反力支架4个与铁地板垂直的平面上距离铁地板1.5m安装2个长1m的滑动直线导轨，直线导轨用于约束模拟车身质量块在垂向的运动
四立柱试验系统3d模型 3D Model
四立柱试验系统3d模型: 采购一套四立柱试验系统，用于汽车底盘的台架在环试验，要求生成一张表述设备构成的三维图：直线电机驱动的四立柱试验系统放置在长宽为5m*10m的铁地板上，单个立柱的高度为1.5m，四个立柱布置点在3m*1.9m矩形的四个角上，前、后两个四立柱中间处各布置一个长宽高为0.8m*0.8m*2.5m的反力支架，在反力支架4个与铁地板垂直的平面上均安装2个滑动直线导轨，直线导轨用于约束模拟车身质量块在垂向的运动
四立柱试验系统3d模型 3D Model
四立柱试验系统三维模型: 采购一套四立柱试验系统，用于汽车底盘的台架在环试验，要求生成一张表述设备构成的三维图：直线电机驱动的四立柱试验系统放置在长宽为5m*10m的铁地板上，单个立柱的高度为1.5m，四个立柱布置点在3m*1.9m矩形的四个角上，前、后两个四立柱安装位置中间各布置一个长宽高为0.5m*0.5m*2.5m的反力支架，在反力支架每个0.5m*2.5m的面上均安装2个滑动直线导轨，直线导轨用于约束模拟车身质量块在垂向的运动
四立柱试验系统三维模型 3D Model
四立柱试验系统 3d模型: 采购一套四立柱试验系统，用于汽车底盘的台架在环试验，要求生成一张表述设备构成的三维图：直线电机驱动的四立柱试验系统放置在长宽为5m*10m的铁地板上，单个立柱的高度为1.5m，四个立柱布置点在3m*1.9m矩形的四个角上，前、后两个四立柱安装位置中间各布置一个长宽高为0.5m*0.5m*2.5m的反力立柱，在4个0.5m*2.5m的面上安装2个滑动直线导轨，导轨垂直与铁地板布置在平面两侧
四立柱试验系统 3d模型 3D Model
test tube rack 3d model: a lab holder for a 18mm test tube and a 13mm test tube
Test Tube Rack 3D Model
test tube rack 3d model: test tube rack with multiple tubes in a rectangular frame
Test Tube Rack 3D Model
medical device 3d model: white medical blood analyzer device with a test tube and a color gauge display, modern laboratory instrument
Medical Device 3D Model
test tube 3d model: transparent glass test tube with orange measurement marks
Test Tube 3D Model
test tube 3d model: test tube, glass, transparent with orange measurement marks
Test Tube 3D Model
document prop 3d model: IELTS test report form document with photo and stamp
Document Prop 3D Model
test tube 3d model: test tube with green liquid, glass lab prop
Test Tube 3D Model
fur-textured block 3d model: A rectangular 3D test block with exact dimensions 2 cm x 6 cm x 1 cm. Sharp, clean rectangular shape with flat vertical sides and a flat bottom surface. The top surface features a stylized sculpted fur texture inspired by tabletop miniatures: thick fur clumps, clearly separated strands, deep directional grooves, layered texture. The fur is exaggerated and bold, not fine hair. Minimum groove depth 0.6 mm, strand width at least 0.8 mm to ensure FDM printability with a 0.4 mm nozzle. Strong high-relief surface. The other five faces remain completely smooth and flat. Solid object, manifold mesh, no hollow areas. Optimized for FDM 3D printing, no overhangs exceeding 45 degrees, clean topology, watertight mesh, centered object, neutral background.
Fur-textured Block 3D Model
test rig 3d model: test rig frame with harness and metal frame structure on lab floor
Test Rig 3D Model
probówka 3d model: 3d probówka okragłą, z literkami w srodku tworzacymi weblab, szklana, cinematyczna na poziomie comercyjnym
Probówka 3D Model
simple electronic device 3d model: give this image as 3D model
Simple Electronic Device 3D Model
neon blue test tube 3d: a cybernatic test tube in schimmering in neon blue standing for The Dev Lab
Neon Blue Test Tube 3d 3D Model