water sensor device 3d model

🔷 Front Side Flat surface with a slight curve. At the upper center is a water-drop-shaped LED light (~2 cm tall) that glows blue. Below it is a smaller water-drop icon for identification. The details can be slightly engraved (indented) to add depth in the 3D model. 🔷 Back Sid:Includes a battery cover (~3 × 2 cm), designed as a sliding panel. Ventilation holes (about 1 mm each) arranged in a grid pattern. Flat surface for double-sided tape or magnetic attachment. 🔷 Side Panels One side:A small power button (~1 × 0.5 cm), slightly raised Below it: speaker holes for sound alerts Other side:Optional USB-C charging port or battery slot 🔷 Bottom Side:Contains two metal sensor probes: Length: ~1 cm Diameter: ~2 mm Distance between them: ~5 mm Optional: external sensor wire (10–15 cm) for flexible placement. 🔷 Installation on Air Conditioner:The device is attached under the indoor unit or near the drain pipe. The sensor should be placed at the lowest point where water touches the probes