3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
Anonymous1773359198
03-28 16:39
Model Name
desk organizer 3d model
Tags
3d printing
3d printing realistic
desk organizer
furniture
furniture 3d printing
furniture 3d printing realistic
furniture realistic
realistic
Prompt
🧩 1. Universal Desk Clip (Base Part) Purpose: Attaches to any desk and holds all modules. 📐 Dimensions - Desk thickness range: 12–32 mm - Clip width: 60 mm - Clip height: 55 mm - Wall thickness: 3 mm - Living hinge thickness: 1.2 mm (flexible PLA/PETG works great) 🔧 Geometry - U‑shaped clip with a curved inner surface for grip - Back arm: straight - Front arm: slightly angled inward for tension - Top surface: 20 mm deep platform with a rail slot 🔩 Rail Slot (for modules) - Rail width: 16 mm - Rail height: 3.2 mm - Tolerance: 0.3 mm clearance - Modules slide on from the side and lock with a small tab. 🎮 2. Module 1: Headphone Hook 📐 Dimensions - Hook length: 75 mm - Hook width: 20 mm - Hook thickness: 4 mm - End lip: +8 mm upward curve 🔧 Attachment - Back of hook has a female rail channel: - 16.3 mm wide - 3.5 mm tall - 20 mm long 🔌 3. Module 2: Cable Holder 📐 Dimensions - Base: 40×25×10 mm - Three cable slots: - USB‑C: 4×8 mm - Lightning: 3×7 mm - Micro‑USB: 3×6 mm - Thick cable slot: 10 mm round 🔧 Attachment - Same rail channel as above. 📦 4. Module 3: Mini Drawer 📐 Dimensions - Outer shell: 50×40×20 mm - Drawer inner space: 42×32×14 mm - Stopper tabs: 1.5 mm thick 🔧 Attachment - Rail channel on the back - Drawer slides out the side 🎮 5. Module 4: Controller Holder 📐 Dimensions - Arms: 70 mm long - Angle: 30° downward - Width between arms: 60 mm - Arm thickness: 4 mm - Front lip: 6 mm 🔧 Attachment - Rail channel on back - Reinforced ribs underneath 📱 6. Module 5: Phone Stand 📐 Dimensions - Platform: 70×60 mm - Angle: 65° - Lip height: 10 mm - Cable passthrough: 12×6 mm slot 🔧 Attachment - Rail channel on back 🥤 7. Module 6: Cup/Can Holder 📐 Dimensions - Inner diameter: 75 mm - Wall thickness: 3 mm - Height: 60 mm - Bottom: honeycomb or solid 🔧 Attachment - Rail channel on side - Reinforced arm connecting cup to rail 🧲 8. Module 7: AirTag Holder 📐 Dimensions - Outer: 45 mm circle - Inner: 32 mm circle - Snap‑fit ring thickness: 1.8 mm 🔧 Attachment - Rail channel on back 📝 MakerWorld Description (copy/paste ready) Title: Snap‑Fit Desk Buddy System – Modular Desk Organizer Set Description: The Snap‑Fit Desk Buddy System is a fully modular desk organization kit designed for clean setups, gamers, students, and creators. All modules attach to a universal desk clip using a simple slide‑in rail system. Print only the modules you need — or remix your own. Included Modules: - Universal Desk Clip - Headphone Hook - Cable Holder (USB‑C, Lightning, Micro‑USB, HDMI) - Mini Drawer - Controller Holder - Phone Stand - Cup/Can Holder - AirTag Holder Print Settings: - No supports - 0.2 mm layer height - 15–25% infill - PLA or PETG - Tolerance: 0.3 mm recommended Tags: desk, organizer, modular, snapfit, cable, headphone, controller, phone stand, cup holder, airtag, gaming, workspace, makerworld, easy print
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1773359198
Anonymous1773359198Anonymous1773359198