3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1768671641
01-17 18:26
Model Name
flame display case 3d model
Tags
3d printing
3d printing realistic
display
props
props 3d printing
props 3d printing realistic
props realistic
realistic
rectangular card
Prompt
[18:21, 17/01/2026] Arron: Create a 3D printable decorative display CASE ONLY. This model must be an empty outer frame designed to hold a rigid rectangular card holder inserted later by the user. The interior must be completely empty. DO NOT create a card. DO NOT create a slab. DO NOT create labels, text, logos, titles, or branding. DO NOT show or include any internal object. The display case should be vertical and slim, with an internal rectangular cavity sized approximately 71 mm wide × 104 mm tall × 8 mm deep. These dimensions are for internal clearance only. The internal cavity must be plain, flat, and undecorated. The exterior of the case must be fully covered in raised, extruded flame-like designs inspired by Lead-type Pokémon aesthetics. The flames should resemble jagged, m… [18:26, 17/01/2026] Arron: "Create a 3D printable decorative display CASE ONLY. This model must be an empty outer frame designed to hold a rigid rectangular card holder inserted later by the user. The interior must be completely empty. DO NOT create a card. DO NOT create a slab. DO NOT create labels, text, logos, titles, or branding. DO NOT show or include any internal object. The display case should be vertical and slim, with an internal rectangular cavity sized approximately 71 mm wide × 104 mm tall × 8 mm deep. These dimensions are for internal clearance only. The internal cavity must be plain, flat, and undecorated. The exterior of the case must be fully covered in raised, extruded flame-like designs inspired by Lead-type Pokémon aesthetics. The flames should resemble jagged, metallic, industrial, or molten steel textures, with sharp edges and dynamic, heavy-flowing shapes. The flames must protrude outward from the surface and must not be engraved or indented. The flame design must cover *all outer surfaces*, including: - front - back - left side - right side - bottom - top Flames should wrap continuously around corners and edges, giving the entire case a dramatic, rugged, Lead-type Pokémon aesthetic. The top edge must have large flames rising upward, with tips extending above the top of the case. The back surface should also feature fully sculpted flames, not just plain material, creating a fully immersive design on every visible surface. There must be no flat border, bezel, rim, or smooth frame between the opening and the flames. The flames must begin immediately at the opening edge. The opening must remain empty and must not contain a card, holder, or preview object.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1768671641
Anonymous1768671641