3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1768671641
01-17 18:32
Model Name
flame display case 3d model
Tags
3d printing
3d printing realistic
printable
props
props 3d printing
props 3d printing realistic
props realistic
realistic
rectangular card
Prompt
[18:29, 17/01/2026] Arron: "Create a 3D printable decorative display CASE ONLY. This model must be an empty outer frame designed to hold a rigid rectangular card holder inserted later by the user. The interior must be completely empty. DO NOT create a card. DO NOT create a slab. DO NOT create labels, text, logos, titles, or branding. DO NOT show or include any internal object. The display case should be vertical and slim, with an internal rectangular cavity sized approximately 71 mm wide × 104 mm tall × 8 mm deep. These dimensions are for internal clearance only. The internal cavity must be plain, flat, and undecorated. The exterior of the case must be fully covered in raised, extruded flame-like designs inspired by Lead-type Pokémon aesthetics. The flames should have jagged, heavy… [18:32, 17/01/2026] Arron: "Create a 3D printable decorative display CASE ONLY. This model must be an empty outer frame designed to hold a rigid rectangular card holder inserted later by the user. The interior must be completely empty. DO NOT create a card. DO NOT create a slab. DO NOT create labels, text, logos, titles, or branding. DO NOT show or include any internal object. The display case should be vertical and slim, with an internal rectangular cavity sized approximately 71 mm wide × 104 mm tall × 8 mm deep. The *overall wall thickness and depth of the case must remain fixed and consistent; the flames must **not increase the depth or thickness of the case*. The internal cavity must be plain, flat, and undecorated. The exterior of the case must be fully covered in *raised, extruded flame-like designs inspired by Lead-type Pokémon aesthetics. Flames should be jagged, dynamic, and energetic, resembling molten metal or industrial energy fire. Flames must **project outward from the wall surface without increasing the case’s overall thickness or depth. Flame shapes must be **consistent in size and style across all surfaces, but **non-symmetrical* and organically varied, so they look natural rather than mirrored or repeated patterns. The flame design must cover *all six outer surfaces*: - front - back (fully sculpted, not flat) - left side - right side - bottom - top Flames should wrap continuously around corners and edges, forming a *360° sculpt*, without changing the base depth of the case. The top edge must have upward-rising flames with tips extending above the top of the case. The back surface must also be fully sculpted, with the same jagged Lead-type flame style, and no flat or plain areas. There must be no flat border, bezel, rim, or smooth frame between the opening and the flames. Flames must begin immediately at the opening edge, wrapping partially into the inner perimeter to integrate the opening into the sculpture. The opening must remain empty and must not contain a card, holder, or preview object. The model must be suitable for *resin 3D printing* and exportable as an *STL file*, with clean topology and printable wall thickness. The geometry should balance fine detail with smooth surfaces, keeping jagged, dynamic Lead-type flame shapes without increasing the case’s physical depth."
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1768671641
Anonymous1768671641