cutaway regional jet 3d model

3D cutaway regional jet blueprint.Wing:low-mounted,span 32m,AR 10.5,sweep 22°,taper 0.2,supercritical 12% t/c root,9% tip,3° dihedral,1.8m 15° winglets.Fuselage:35m×3.4m,area-ruled 3.1m waist,4.5m nose,8m upswept tail.Tail:H-stab 10m span 16% wing area,all-moving,V-fin 6m 35° sweep.Engines:2×1.6m nacelles,4.2m long,2° toe-out pylons at 40% span.Gear:tricycle retractable.Left half transparent:main spar 25% chord,aux 65%,ribs,fuel tanks,3+2 90-seat cabin,cockpit side-sticks.Right half solid white/blue livery.Streamlines,Cp pressure map blue upper/red lower.Isometric front-left-above,8K,photorealistic technical illustration.[CRITICAL:wing VERY SLENDER,long and narrow,NOT stubby].[CRITICAL:wing sweep 22° visible,leading edge angled back].[CRITICAL:fuselage narrows at wing root,area-ruled waist].[CRITICAL:left half transparent cutaway showing spar,ribs,fuel tanks,cabin].[CRITICAL:streamlines and blue/red pressure map overlaid].