3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
3D Creation Made Simple
Text & Image to 3D Model in seconds
One-Click Texturing & Smart Detail Editing
Free Credits Monthly
Start Free
Anonymous1765399380
12-10 21:42
Model Name
stainless steel reactor 3d model
Tags
machine
rendering
realistic
Prompt
3D model of a 10-liter stirred bioreactor with a partial transparent body. The cylindrical tank must be made of borosilicate glass, but only the front half of the cylinder is transparent so the internal components are fully visible. All other components (top lid, bottom plate, impeller, valves, supports, ports, pipes, baffles, motor housing, shafts, etc.) must be metallic (stainless steel 316L). General geometry Inner diameter: 20 cm Liquid height: 31.8 cm External cooling jacket around the cylindrical wall (20–40 mm gap). Use stainless steel for jacket, top lid, bottom plate, and fittings. Keep the internal cutaway or transparent half so everything inside is visible. Top-mounted motor Include a motor + gearbox mounted on top of the lid. Central shaft enters through a mechanical seal and goes straight down. Correct Rushton impeller One 6-blade Rushton turbine. Flat horizontal blades facing upward, not vertical. Impeller mounted at one-third of the tank height, approx 10.6 cm above the base. Disk diameter: 6.7 cm. Blades metallic, accurate geometry. Internal components 4 stainless-steel vertical baffles, 2 cm wide, with 3–5 mm gap from the glass wall. Sparger ring 2–5 cm above the base, with small perforations. Sensors on the side wall: pH probe at 40–50% height DO probe at the same height Temperature probe near the impeller level Sampling port at 30–40% height Harvest valve at the bottom or lower side Keep all ports, valves, fittings, and connectors metallic. Structural support Add 3 or 4 stainless-steel tubular support legs under the tank. Clearance under the tank: 8–12 cm. Bottom drain valve visible in this lower area. Cutaway / transparency requirement The front half of the cylinder must be glass and fully transparent. The back half can be non-transparent or stainless/opaque. Do NOT make the top lid or bottom base transparent. Overall look High-accuracy engineering proportions. Smooth, realistic stainless-steel finish on all metal components. Clean, detailed geometry of sensors, baffles, impeller, sparger, ports, and motor.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
