camera mount 3d model

3D printable clamp-style camera mount that grips around a cylindrical tube of approximately 32mm diameter (gas spring arm body). The clamp consists of two half-circle jaws that wrap around the tube and are tightened together with two M4 bolts on each side. The clamp body is about 50mm wide and 40mm tall. On top of the clamp, there is a flat horizontal platform (60mm x 40mm x 8mm) with a centered 1/4-20 female thread socket (6.35mm hole, 10mm deep) for attaching a camera or ball head mount. The clamp should have smooth inner surface to grip without scratching. Matte black plastic appearance. Functional, minimal industrial design. No sharp edges. Bolt holes are 4.5mm diameter with recessed hex nut traps on one side.