3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1768674009
01-18 15:29
Model Name
shark plaque 3d model
Tags
props
3d printing
realistic
Prompt
“3D printable display plaque with matching stand, optimized for FDM printing. Plaque: Rectangular solid plaque with a flat back, slightly rounded corners, and a subtle raised border frame. Includes a simple shark silhouette engraved near the top center above the text. Centered engraved English text in a bold, simple sans-serif font suitable for small-scale FDM printing. Engraved text reads exactly: ‘In July 1916, swimmers along the New Jersey coast were frightened by a series of shark attacks. This figurine set shows how people reacted during this historic event, which helped change ocean safety forever.’ Letters are recessed (engraved), evenly spaced, and deep enough for clear printing and optional paint fill. Smooth geometry, clean topology, watertight solid mesh, STL-ready. Stand: Separate solid display stand designed to hold the plaque at a slight backward angle (10–15 degrees). Stand includes a wide base for stability and a shallow slot or ledge sized to securely hold the bottom edge of the plaque. No thin parts, rounded edges, solid geometry. Both plaque and stand are optimized to print flat on the build plate with no supports or minimal supports.” Recommended Dimensions Plaque Width: 4–5 inches Height: 2.5–3 inches Thickness: 0.3 inches (7–8 mm) Letter depth: 0.8–1.2 mm Shark silhouette depth: 0.6–1.0 mm Stand Width: same as plaque or slightly wider Base depth: 1.5–2 inches Slot depth: 4–5 mm Backward tilt: 10–15°
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1768674009
Anonymous1768674009