3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1773168413
05-18 20:53
Model Name
ergonomic cutlery adapter 3d model
Tags
props
3d printing
realistic
Prompt
3D-printable ergonomic cutlery handle adapter for reduced hand mobility. Single-piece grip slides over fork/spoon/knife handle, locks with lateral M3 screw. SHAPE: Tapered frustum, 100 mm. Top ∅38 mm, bottom ∅30 mm, smooth continuous taper. CANAL: 12×8 mm rectangular through-hole, full length, centered on axis. 1 mm chamfer at insertion opening. LOCK: ∅3.5 mm hole perpendicular to canal, 25 mm from bottom. Opposite side: M3 hex nut pocket 8 mm wide × 3 mm deep, fully recessed. GRIP (top 65 mm): 6 evenly-spaced longitudinal grooves, 3 mm wide, 2 mm deep, R1.5 U-profile. Between grooves: sinusoidal ridges 0.6 mm high, 3 mm pitch, circumferential. FLANGE (top face): ∅46 mm, 5 mm thick. 45° chamfer 3 mm on underside. Flat smooth top. FILLETS: All outer skin-contact edges ≥ R1.5 mm. Flange-body transition R3 mm. Canal insertion: 1 mm chamfer (not fillet). PRINT: FDM PLA/PETG. Upright (bottom down), no supports needed. Min wall 2.5 mm. Nut pocket bridges 6 mm short axis.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1773168413
Anonymous1773168413