3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1773313348
03-12 11:12
Model Name
3d printed battery box
Tags
props
3d printing
realistic
Prompt
3D printing box, specially designed for 8cm (width) × 32cm (length) RGB light board. Core requirements: 1. The box is split into upper and lower halves (horizontally split, 1cm high each) for easy separate printing; the two halves are joined with buckles (3 on each long side and 1 on each short side), with no looseness or misalignment after joining; 2. A slot is reserved on the surface of the upper cover, with size 8cm × 32cm and depth 0.4cm, and the edge of the slot is chamfered by 0.1cm; the light board is flush with the upper cover surface after embedding, without shaking or falling off; 3. The lower box has a built-in battery compartment for 2 18650 batteries (placed side by side), with reserved space for battery positive and negative wiring, and a reserved switch hole of 1.2cm in diameter next to the battery compartment (compatible with touch switches); 4. Overall size 32.2cm (length) × 8.2cm (width) × 2cm (height), wall thickness 2mm, no undercuts or complex structures, supports 3D printing without supports, smooth surface, prioritizes compatibility and printing success rate, and can be directly exported to STL format after generation for 3D slicing and printing.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1773313348
Anonymous1773313348