3D Model: Create An Accurate 3D Model Of An Outdoor Industrial Free-cooling Chiller System With Two Modules On A Concrete Pad. The Main Free-cooler Measures 13.38 M L × 2.69 M H × 2.14 M W (2.47 M With Wet Pads) And Has Multiple EC Axial Fans With Wire Guards On Top, V-shaped Coil Banks On Both Sides, And Optional Adiabatic Pre-cooling Panels, Built In Galvanized Grey Steel Panels With Seams And Fasteners. The Trim-cooler Is 3.55 M L × 2.49 M H × 2.23 M W, Placed ~1 M Apart, With A Flat Top, Front Control Panel With Display/switches, And Multiple Scroll Compressors With Piping Inside. Connect The Modules With Insulated Hoses And Visible Water-coil Piping, Plus Cable Conduits. Both Sit On Skid Frames Above The Concrete Base. Emphasize Industrial Realism, Accurate Proportions, And Scale, Showing The Free-cooler About 4× Longer Than The Trim Module