3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1748589002
01-22 01:44
Model Name
iphone charging stand 3d model
Tags
props
rendering
realistic
Prompt
======================== OVERALL LAYOUT ======================== - One-piece solid desk charging stand - Flat bottom - Rounded rectangular base - Compact but comfortable spacing - All chargers install from above or underneath with generous clearance - NO floating platforms, NO elevated pedestals ======================== 1) AIRPODS – LEFT SIDE ======================== CURRENT ISSUE: AirPods area is too small and cramped. REQUIRED FIX: - Replace AirPods area with a rounded oval / pill-shaped pocket - Match the general shape drawn in green (elongated oval) - Increase overall circumference for easy placement and finger access DIMENSIONS & FUNCTION: - Outer pocket shape: rounded oval, symmetrical - Inner landing area: flat - Pocket size: approx. 70–75 mm long x 55–60 mm wide - Depth: shallow (2–3 mm) so AirPods case sits flat and grounded - Centered vertical hole OR wide slot for charging cable - Cable opening width: 18–20 mm (finger-friendly) - Smooth chamfered edges so cable can be dropped in easily RESULT: AirPods case sits flat, centered, and grounded with plenty of room. No tight fitting. No fiddling. ======================== 2) IPHONE – CENTER (ADD FULL BACK SUPPORT) ======================== CURRENT ISSUE: iPhone has no rear support and cannot properly lean or charge. REQUIRED FIX: - Add a FULL HEIGHT BACK SUPPORT WALL behind the iPhone - Phone must lean against this wall at ~75 degrees - Phone rests on a deeper front ledge DIMENSIONS & FUNCTION: - Front ledge depth: 22–25 mm (larger than before) - Ledge height: 16–18 mm - Slot width: 90–94 mm (thick case friendly) - Back support wall extends from base up behind phone - Wall angle: approximately 75 degrees - Wall height tall enough to support phone near its top third CHARGING: - Vertical slit centered behind the ledge - Slit width: 18–20 mm - Slit runs down into internal cable tunnel - Cable drops in cleanly without bending RESULT: The iPhone lays securely against the stand, not floating. Plenty of space to place the charger without fighting it. ======================== 3) APPLE WATCH – RIGHT SIDE ======================== CURRENT ISSUE: Watch charger is floating and not grounded. REQUIRED FIX: - Replace floating watch mount with a grounded circular cradle - Watch charger must sit fully on the base - Watch band wraps naturally around the circle DIMENSIONS & FUNCTION: - Circular recessed area on base - Outer circle diameter: 50–55 mm - Inner charger hole diameter: 28–30 mm (Apple Watch puck size) - Depth: shallow (2–3 mm) - Charger drops in from above OR slides in from underneath - Cable exits through underside channel - Watch band wraps around the circular form RESULT: Apple Watch lies flat, wraps naturally, and looks intentional. No floating, no awkward elevation. ======================== CABLE MANAGEMENT (ALL DEVICES) ======================== - Oversized internal cable tunnels (minimum 12–14 mm) - Smooth curved paths - Single rear exit - No sharp corners - Designed so cables can be installed or removed easily ======================== PRINTING & STYLE ======================== - FDM friendly (PLA / PETG) - No supports - Overhangs under 45 degrees - Wall thickness 3–4 mm - Smooth fillets and chamfers - Minimalist Apple-style design - Matte finish - No logos or text ======================== FINAL GOAL ======================== A grounded, stable, frustration-free 3-in-1 Apple charging stand where: - AirPods have a larger oval pocket with easy cable drop-in - iPhone has a real back wall and deeper ledge for charging - Apple Watch sits flat in a circular wrap-around cradle - NOTHING floats - NOTHING feels cramped
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
