3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1781739385
06-22 13:43
Model Name
eiffel tower 3d bottle holder
Tags
3d printing
3d printing realistic
architecture
architecture 3d printing
architecture 3d printing realistic
architecture realistic
realistic
Prompt
Create a 3D printable Eiffel Tower gravity wine bottle holder. The tower replaces the simple angled block stand and must lean at 45 degrees. Important: the bottle neck hole must be a true pass-through circular hole going completely through the tower from front to back, not a circle/detail on the side. The hole must be placed on the same line as the bottle neck, so the wine bottle can slide through it naturally. Hole diameter: 32–33mm for standard wine bottle neck. Add slight bevel/chamfer around the hole. The bottle should enter from the lower-left/front side and point upward to the right, like a classic gravity wine holder. The heavy bottle body must sit above the bottom support point so the combined center of mass is directly over the flat base. Make the Eiffel Tower body solid enough for FDM printing, with simplified lattice details, minimum beam thickness 3–4mm. Flat stable base, single printable model, no bottle included. Overall height 220–260mm, base length 150–180mm, thickn
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1781739385
Anonymous1781739385