3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1780556311
06-04 07:02
Model Name
phone tilt mount 3d model
Tags
props
3d printing
realistic
Prompt
Create a 3D‑printable PLA tilt mount. Phone+case size: 168×80×16 mm. Make a cradle: back plate 175×86×3.5 mm, side rails 175×2×10 mm, inner width 82 mm, bottom ledge 12×86×3.5 mm, two strap slots 30×4 mm placed 40 mm from top and bottom. Make a U‑frame: arms 70×4×20 mm, inner width 90 mm, top bar 90×4×20 mm, 3 mm hinge hole on left arm and 3 mm link hole on right arm, both 10 mm below top. Servo mount: outer block 30×20×30 mm with centered pocket 23.6×12×24.5 mm, two tabs 20×8×2 mm with 2 mm holes. Linkage arm: 18×3×3 mm with 2 mm hole on one end and 3 mm on the other. Hinge pin: 3 mm × 20 mm cylinder. Assemble: cradle between arms, hinge left, servo right, linkage connects horn to frame. Tilt range ±30°. Output separate parts, assembled model, and exploded view.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1780556311
Anonymous1780556311