3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1782584190
06-27 18:16
Model Name
sand mold 3d model
Tags
props
3d printing
realistic
Prompt
Create a 3D-printable STL model of a children’s beach sand mold/stamp that makes the name “Aspen” in sand. Design requirements: * Overall size: about 6 inches wide, 2.75 inches tall, and 1.5 inches high/deep. * Shape: rounded rectangular tray/mold with soft rounded corners. * Wall thickness: 0.25 inches. * The mold should be hollow/open on top so a child can fill it with sand, pack it tight, flip it over, and leave the name “Aspen” shaped clearly in the sand. * The name “Aspen” should be built into the inside bottom of the mold as rounded, chunky bubble-style letters. * The letters must have smooth rounded edges and fillets, with no sharp corners or thin fragile details. * The letters should be mirrored/reversed inside the mold so that when the sand is flipped out, the word reads correctly as “Aspen.” * Make the letters large and easy to read, filling most of the 6-inch width while leaving enough wall thickness around the outside. * Use a child-safe design: all outside edges rounded,
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1782584190
Anonymous1782584190