3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1780717830
06-06 03:50
Model Name
cable marker 3d model
Tags
props
3d printing
realistic
Prompt
Create a 3D-printable two-piece clamshell cable marker for 12/3 SOOW/SJOW cable. The marker consists of two mirrored halves that bolt together around a cable. Overall assembled dimensions: 62 mm long × 36 mm wide × 18 mm thick. Center cable bore: 16.5 mm diameter. Rounded rectangular body with 5 mm corner radii. Split line runs through the center, creating equal upper and lower halves. Two M3 screw holes located symmetrically near each end, 8 mm from the ends and centered across the width. Through holes are 3.2 mm diameter. Opposite half contains M3 hex nut traps (5.7 mm across flats, 2.5 mm deep). Outer edges have 1.5 mm chamfers. Recessed text area on both sides, 1 mm deep, for cable identification numbers. Wall thickness 3 mm minimum throughout. Designed for FDM 3D printing in PETG or ABS. Mechanical CAD style, dimensionally accurate, manifold geometry, ready for STL export.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1780717830
Anonymous1780717830