3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1781847195
06-19 05:36
Model Name
automated microscope 3d model
Tags
machine
rendering
realistic
Prompt
Create a detailed 3D model of an automated OpenFlexure microscope with the following components arranged in this exact optical configuration: **OPTICAL ARRANGEMENT **(from top to bottom) 1. **Top**: RMS-threaded microscope objective lens (40x magnification, silver metal, 23mm diameter) mounted vertically 2. **Middle**: 12.7mm diameter achromatic doublet tube lens (50mm focal length, clear glass with gold-colored coating rings, 5mm thick) positioned horizontally in a black 3D-printed cylindrical optics module holder (push-fit design, 40mm length) 3. **Bottom**: Raspberry Pi Camera Module 3 (black PCB board, 25mm x 25mm square, with lens removed, facing upward toward the tube lens) attached to the bottom of the optics module with two M2×6.5mm screws 4. **Connection**: 200mm thin ribbon cable (gray, flat, 10mm wide) connecting the camera module to the right side of the Pi board 5. **Mounting**: Black 3D-printed base plate (80mm x 80mm square, 10mm thick) with M3×10mm screw visible o
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
