3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1780404334
06-02 20:05
Model Name
car hood scoop 3d model
Tags
3d printing
3d printing realistic
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
Create a fully functional single automotive hood scoop based on the reference image. This is one individual scoop, not a dual or mirrored set. Dimensions: 150 mm total length, 62 mm front opening width, 50 mm rear width, 15 mm maximum height, and 55 mm internal airflow channel. Design a smooth aerodynamic WRC-inspired profile with a rounded front intake, hollow internal duct, open rear section, and 3 mm wall thickness. Include an 8 mm mounting flange underneath for VHB tape or adhesive installation. Add internal reinforcement ribs, water drainage channels, smooth transitions, and realistic manufacturable geometry. The base should have a slight curvature suitable for a Peugeot 206 hood. Generate a watertight solid model with clean topology, no non-manifold edges, and no self-intersections. Optimize for PETG, ASA, or ABS 3D printing. The scoop must resemble an OEM performance part, low-profile, aggressive, aerodynamic, and fully printable. Output as production-ready STL and STEP geometry
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1780404334
Anonymous1780404334