3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1782217603
06-23 12:30
Model Name
stylized chameleon 3d model
Tags
creatures & animals
3d printing
stylized
Prompt
Create a functional 3D printable headset holder shaped like a stylized chameleon for the upper left corner of a computer monitor. The object should be one single solid part for FDM 3D printing with PLA and a 0.4 mm nozzle. It should be optimized for support-free or very low-support printing. The flat back/bottom side must be completely smooth and should serve as the print bed contact surface. Maximum print height in Z direction: 20 mm. Approximate total size: 150 mm wide, 40 mm high, and maximum 20 mm deep in print direction. The model needs an L-shaped mounting area for the upper left corner of a monitor. It should fit monitors up to 15 mm thick, with a little clearance, around 16–17 mm internal space. Include a flat rectangular adhesive area for double-sided nano tape, about 80 mm long and 10 mm wide. This adhesive area must be clean, flat, smooth, and free of texture. The chameleon should lie on top of the monitor corner. It must not be a flat silhouette. It should have a visible
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1782217603
Anonymous1782217603