3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1780722952
06-06 05:16
Model Name
3d printable hinge
Tags
machine
3d printing
realistic
Prompt
Design a 3D-printable, "print-in-place" functional hinge for an RC model airplane made of foam. The hinge must be designed as a single integrated part with built-in clearance so it doesn't fuse during printing. Here are the exact specifications in millimeters: - Total width (fully opened): 36mm - Total height: 20mm 1. Tabs/Flaps (The two outer plates that insert into the foam): - Length of each tab: 16mm - Height of each tab: 20mm - Thickness of each tab: 1.2mm (Crucial to keep it thin so it doesn't deform the foam) - Add 4 to 6 small through-holes (2mm diameter each) distributed on each tab for glue/epoxy anchorage. 2. Center Barrel & Pivot Mechanism (Print-in-place pin): - Outer diameter of the center barrel: 4mm - Inside pin diameter: 1.8mm - Internal hole diameter of the barrel: 2.2mm - Provide a strict 0.4mm clearance gap between the moving pin and the barrel walls to prevent fusing during printing. The hinge must be completely flat on the print bed for optimal printing orient
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1780722952
Anonymous1780722952