3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1780946523
06-24 04:31
Model Name
smart cane enclosure 3d model
Tags
3d printing
3d printing realistic
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
Design a fully parametric 3D printable PLA enclosure for a smart walking cane. The enclosure must include a through-hole for a 20 mm diameter tube (0.4 mm clearance), allowing the cane to pass through the body. Add a front mount for an HC-SR04 ultrasonic sensor with aligned openings, internal space for an Arduino Nano or Weeemake board, a 4xAAA battery holder, a 12 mm buzzer with sound vents, a side ON/OFF slide switch, cable routing channels, and M3 mounting pillars. Include a removable screw-on cover. Use 2.5 mm wall thickness, rounded corners, overhangs under 45°, and optimize for support-free FDM PLA printing. The enclosure should be lightweight, ergonomic, durable, easy to assemble, and resemble a commercial assistive device. The ultrasonic sensor should face forward with a 10° downward angle for obstacle detection.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1780946523
Anonymous1780946523