3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1782163061
06-22 21:26
Model Name
wedge gauge enclosure 3d model
Tags
props
3d printing
realistic
Prompt
Got it — here's a trimmed version under 1000 characters, ready to paste anywhere: Design a 2-piece 3D-printable wedge case for a desktop CPU gauge, sized for a 100x100mm print bed (each part must fit within 100x100x100mm). PLA, 3mm walls, no supports needed, self-supporting angles. Shape: right-angle wedge/ramp, 95x95mm footprint, 70mm tall at front tapering to 15mm at back, top sloped ~35-40°. Part A (top/front shell): sloped top + tall front face. 60mm circular cutout centered in front face for a gauge (50mm deep, with a lip at 45mm depth for the gauge flange). 6mm hole for an LED 15mm right of gauge. 12mm hole for a push button 15mm left of gauge. Hollow underside. Part B (base tray): flat bottom, same footprint. 4 pegs (6mm dia, 4mm tall) inset to hold an 83x55mm breadboard. Rectangular slot 12x6mm in back wall for USB-C cable. Snap-fit lip/groove joint + 4 alignment pins (3mm dia) around rim to join with Part A. Internal clearance: 60x85mm floor area, 20mm height above breadboard
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1782163061
Anonymous1782163061