3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1782073615
06-21 20:32
Model Name
ring seal 3d model
Tags
machine
3d printing
realistic
Prompt
* Outer Diameter: 300.0 mm * Center Hole Diameter: 8.0 mm * Base Wall Thickness (main disc body): 1.5 mm * Double-sided Symmetry: The product must be completely symmetrical on both sides (obverse and reverse). * Center Label Area (both sides): 100.0 mm diameter with a step elevation of +0.5 mm on each side. Total plastic thickness in the center area shall be 2.5 mm. * Outer Protective Rim/Bead (both sides): Rim width of 3.5 mm with an elevation of +0.5 mm on each side. Total plastic thickness at the outermost edge shall be 2.5 mm. * Fillet and Radius Requirements: All step transitions between different wall thicknesses (at the center area and the outer rim) must be designed with smooth blending radii R = 0.3 - 0.5 mm on both sides. Sharp 90° angles on the molding surfaces are strictly prohibited. * Draft Angles (Taper): Not less than 0.5°–1° on all vertical and edge surfaces of the steps to prevent sticking.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1782073615
Anonymous1782073615