3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1780913242
06-08 19:43
Model Name
plastic car organizer 3d model
Tags
props
props realistic
props rendering
props rendering realistic
realistic
rendering
rendering realistic
Prompt
Plastic car organizer tray. Dimensions: 250mm wide, 110mm deep, 90mm tall. Flat bottom, open top, no lid, minimum 2.4mm wall thickness everywhere. LEFT SECTION (x=0 to 94mm): One cylindrical cup holder pocket. Inner diameter 81mm, depth 80mm, open top. Centered at x=47mm, y=55mm. Outer wall 3mm thick. Fully hollow inside. RIGHT SECTION (x=95mm to 248mm, width=153mm): Two-tier storage tray. Upper balcony shelf: 110mm wide (x=95 to 205mm), 25mm deep (front edge), 40mm tall, floor sits at z=50mm, open top, 2.4mm walls. Lower tier: full 153mm wide, 70mm deep, 50mm tall (z=0 to 50mm), open top above shelf level. 3mm wall between cup holder and tray. BACK FACE ATTACHMENT: Hollow cylindrical sleeve protruding 40mm in the backward direction. Outer diameter 83mm, inner diameter 77mm, wall 3mm. Centered at x=47mm, vertically centered at z=45mm. Four snap tabs equally spaced 90° apart on outer sleeve surface: each 8mm wide, 6mm tall, 1.5mm protrusion, 1mm hook tip. One flat D-cut on sleeve: 4mm d
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1780913242
Anonymous1780913242