3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1743070308
06-02 14:04
Model Name
acoustic horn amplifier 3d model
Tags
3d printing
3d printing realistic
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
Single-piece passive acoustic horn amplifier for smartphone. 3D-printable in FDM without supports. Dimensions: 220x130x105mm, flat stable base. Monolithic minimalist architectural form — exterior shaped as a tapered asymmetric wedge where the internal acoustic geometry defines the outer silhouette. Smooth matte surfaces, no decoration, no visible seams. Phone cradle slot at top center, 80mm wide x 12mm deep, chamfered edges, speaker port facing down into horn throat. Throat diameter 11mm, exponential flare curve expanding continuously to 38cm² rectangular mouth aperture centered on front face. Internal horn path folded 180° to achieve 160mm acoustic length within compact body. Walls minimum 3mm, 4mm at bends. No parallel interior faces — all angled 3° to suppress standing waves. Bottom cavity open or closed-back with small port. No overhangs exceeding 45°. PLA/PETG compatible. The horn mouth aperture should be the dominant visual feature of the front face, framed by the clean monolithi
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1743070308
Anonymous1743070308