3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1781360380
06-13 14:30
Model Name
robot vacuum part 3d model
Tags
machine
rendering
realistic
Prompt
. The Ground Skirt (The Seal) Material: Thin, highly flexible silicone or ultra-soft TPU. Function: It rings the entire perimeter of the robot's underside. It must hover exactly at your target ground clearance (e.g., 2mm). The Reality: If this skirt is rigid, it will catch on track seams and rip your robot apart. If the gap is too large, it bleeds air and kills your vacuum. 2. The Plenum (Chassis Cavity) Material: Your rigid main chassis plate (Carbon fiber or thick FR4/PCB material). Function: This acts as the "roof" of the vacuum chamber. The Reality: It must be strictly airtight. If you have open screw holes or wiring gaps near the center of the chassis, the fan will pull air through those holes instead of from under the skirt. 3. The Intake Volute (The Funnel) Material: 3D printed PETG or ABS. Function: A custom shroud that connects the hole in your chassis deck directly to the bottom lip of the 27mm AEORC EDF. The Reality: You cannot just float the fan above a hole. This v
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
