drip hose connector 3d model

A 17mm plastic drip irrigation hose connector, approximately 60mm long. It has two green barbed ends for attaching flexible hoses, and two yellow tightening rings around the center area. Each barbed end is about 15mm in outer diameter with 3 to 4 small ridges to grip the hose. The yellow rings are about 20mm in diameter and slightly thicker than the tube. The central part is cylindrical and hollow for water flow, with an inner hole running through the entire connector. Both ends are symmetrical. The overall shape should be clean, solid, and functional for a garden drip irrigation system, ready for 3D printing as a single solid piece.