3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1781186277
06-11 13:58
Model Name
fishing rod accessory 3d model
Tags
props
3d printing
realistic
Prompt
A 3D‑printable fishing rod accessory consisting of a straight, horizontal mounting bar that attaches to a 22 mm diameter fishing rod using a clamp or bracket on the back side. On the front side of the bar, there are three small tilt‑out drawers arranged in a straight line next to each other. Each drawer is approximately 25 mm wide, 30 mm deep, and 20 mm tall. Each drawer has two cylindrical side pegs that fit into curved slots in the mounting bar, allowing the drawer to slide forward slightly and then tilt downward about 30 degrees for easy access. The curved slots should be shallow arcs that start horizontal and end angled downward. Each drawer has a flat front face that closes flush with the bar, a simple flip‑top lid, and several small drain holes on the bottom. The mounting bar should be rectangular and compact, with a clamp or tightening tab on the back that fits securely around a 22 mm fishing rod. The overall design should look functional, compact, and mechanically realistic.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1781186277
Anonymous1781186277