3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
Anonymous1765455517
12-11 12:45
Model Name
futuristic ring 3d model
Tags
futuristic ring
props
props rendering
props rendering sci fi
props sci fi
rendering
rendering sci fi
ring device
sci fi
Prompt
A 3D-printable universal rear-leg socket for a pig prosthetic, designed as ONE solid part. The inside is a rounded cavity sized for a 50×40 mm stump with 3–4 mm wall thickness and soft organic curvature so it can clamp to either the left or right back leg. The outside is a chunky sci-fi mechanical shell. On the back, add a tall “electronics backpack” with two internal compartments: an upper slide-in slot for a micro:bit (about 52×43×12 mm) and a lower removable battery sled (about 60×35×18 mm) that slides in from the rear and locks with a simple spring-tab latch. Along both sides, sculpt integrated cable channels and clip-shaped hooks so wires can be pushed in and held neatly. On the front bottom edge, create a flat mounting pad with a symmetric 4-hole M3 bolt pattern so the thigh frame can bolt on from either side. All geometry thick and printable, no thin spikes, one watertight solid.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1765455517
Anonymous1765455517Anonymous1765455517